F1 Setting Of Out1 - SMC Networks PF2MC7 Series Operation Manual

■[F 1] Setting of OUT1
Set the output mode of OUT1.
●Switch output operation list
Select the operation required from the table below. Characters in ( ) are for OUT2.
Hysteresis
mode
Window
comparator
mode
Accumulated
output mode
(Increment)
Accumulated
output mode
(Decrement)
Accumulated
pulse output
mode
∗: The operation may become unstable if hysteresis mode or window comparator mode are used during fluctuating flow conditions. In
this case, maintain an interval between the set values and start using after confirming stable operation.
Normal output
-39-
Reversed output
No.PF※※-OMZ0002