Table of Contents
Advertisement
■[F11] Display resolution
This function is used to change the pressure display resolution.
This can be used to prevent the digits from flickering on the display.
<Operation>
Press the
or
button in function selection mode to display [F11].
Setting of display resolution
or
Press the
button to select display
resolution.
: Not selectable depending on the selected display units.
The display resolution selectable unit is MPa, kPa (for ZSE only), kgf/cm
The display units kgf/cm
[F 0] Units selection function on page 27.
Press the
button.
Press the
button to set.
Setting of [F11] Display resolution completed
2
, bar, psi and inHg are selectable only for models with the units selection function.
Move on to setting of display resolution.
Return to function selection mode.
2
, bar, psi and inHg.
-39-
No.PS※※-OMM0007-H
Hide quick links:
Advertisement
Table of Contents
