SMC Networks ZSE40A Operation Manual page 9

Maintenance

Turn off the power supply, stop the supplied air, exhaust the residual pressure and verify the release of
air before performing maintenance.
There is a risk of unexpected malfunction.

Perform regular maintenance and inspections.
There is a risk of unexpected malfunction.

Perform drainage regularly.
If condensate enters the secondary side, it can cause operating failure of pneumatic equipment.

Do not use solvents such as benzene, thinner etc. to clean the Pressure switch.
They could damage the surface of the body and erase the markings on the body.
Use a soft cloth to remove stains. For heavy stains, use a cloth soaked with diluted neutral detergent and fully
squeezed, then wipe up the stains again with a dry cloth.
-8-
No.PS※※-OMM0007-H