Configuring Coresense M10 - ABB CoreSense M10 Installation Manual

—
C h A p T E r 7

Configuring CoreSense M10

Once the CoreSense™ M10 is properly installed and powered, you must configure basic system
parameters at system startup.
NOTICE— CYBERSECURITY
This product is designed to be connected to, and communicate information and data via
a network interface. It is the user's sole responsibility to provide, and continuously ensure,
a secure connection between the product and the user's network or any other network (as
the case may be).
Users shall establish and maintain any and all appropriate measures (such as, but not
limited to, the installation of firewalls, the application of authentication measures, the
encryption of data, the installation of anti-virus programs, etc.) to protect the product, the
network, its system and the interface against any kind of security breaches, unauthorized
accesses, interferences, intrusions, leakages and/or theft of data or information.
ABB and its affiliates are not liable for damages and/or losses related to such security
breaches, any unauthorized access, interference, intrusion, leakage and/or theft of data or
information.
ABB strives to maintain cybersecurity for its products and services. By visiting the web
page, you will find notifications about newly found software vulnerabilities and options to
download the latest software. It is recommended that you visit this web page regularly:
http://new.abb.com/about/technology/cyber-security
Information about your product is also available on the product page:
http://new.abb.com/products/transformers/service/advanced-services/coresense