Establishing Analog 4-20 Ma Connections; Outputs - ABB CoreSense M10 Installation Manual

Establishing analog 4–20 mA connections

Outputs

WARNING
Use only shielded cables for wiring the 4–20 mA outputs interface.
—
Figure 42 Wiring 4–20 mA analog outputs
NOTICE
For more information on the various communication cables used, see Table 4 on
page 24 and "Connector definitions" on page 89.
For more information on configuring the communication protocols, refer to the
CoreSense M10 Monitoring System User Guide.
58
Installation Guide
Case
Input