To Disconnect From A Gc; Other Program Settings - Agilent Technologies 7820A Operating Manual

3
Software Keypad Operation

To disconnect from a GC

Other program settings

32
Click Connect.
4
The software keyboard window title displays the name or
IP address of the connected GC. This information also
appears at the bottom of the window.
If desired, you can enable AutoConnect to always connect to
the selected GC when launching the software keypad.
Select Connection > Disconnect.
Settings > Option > Connection
The Connection tab provides options for displaying
user- friendly names for GCs and for enabling automatic
connection to a GC when the software loads.
Enable AutoConnect to connect to the default GC when
starting the software keypad. You can also set this feature
from Connection > Connect.
Use Connection History to assign the default GC that appears
in the Connect list. The connection history lists each GC to
which you have connected.
To assign a name that will appear in the Connect list, select
the GC, then click Change Name. Enter the name in the Name
field, then click Save Name.
To make a GC appear as the first entry in the Connect list,
select it in the history then click Set as Default.
To permanently delete all saved names and all connection
history, click Clear History.
Settings > Option > ShortCuts
The ShortCuts tab allows you to enable, disable, and
customize keyboard shortcuts usable with the software.
To enable keyboard shortcuts, select Enable shortcut on main
panel.
Once shortcuts are enabled, you can use the default
shortcuts, or select and modify them as desired. To change a
shortcut, select it then click Change. Press the keystrokes for
Operating Guide