Adjusting The Binder Up And Down; Position Of The Upper And Lower Fingers Of The Binder; Pq Adjustment - KANSAI SPECIAL DFB Series Instruction

1 5 - 2 A d j u s t i n g t h e b i n d e r u p a n d d o w n
Adjust the binder up and down according to the
fabric to be used. Adjustment is made by loosening
screw A and wing screw I and turning screw D as
required. After this adjustment is made, tighten
screw A and wing screw I.
< Note >
Adjust the position of J and K according to the finished pin
tuck.
1 5 - 3 P o s i t i o n o f t h e u p p e r a n d l o w e r f i n g e r s o f t h e b i n d e r
Position upper and lower fingers so that distance A is
halved by each vertical centerline of the needles.
The line formed by the points of the upper and lower
fingers should be parallel with each horizontal
centerline of the needles.
【16】PQ ADJUSTMENT
A. Adjustment of right & left movement of retainer for elastic thread
The right-left movement of retainer move even of its travel for each needles.
< Adjustment >
Loosen 2 screws on the retainer holder and the retainer eye should keep equal
distance of right-left movement from the center of each needles.
31