Test Pulse Outputs; Configuration Coding - Pilz PSS Series Operating Manual

Function Description

Test pulse outputs

The two test pulse outputs T0 and T1 are suitable for testing the wiring of
input devices. All safety-related inputs must operate in accordance with
the failsafe principle (on switching off). Test pulses are allocated to inputs
via the configurator in the system software (PG). Each test pulse has a
maximum load capacity of 0.5 A.
INFORMATION
The test pulse outputs may not be used as digital outputs for safety
functions.

Configuration coding

The inputs are located on a sub-slot, which is allocated a code:
Slot
0
4-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Sub-slot
0
Inputs/outputs
E0.0 - E0.5
Operating Manual: PSS SB 3006-3 Series
Code
8004
H