Programming Device Interface ("Pg") - Pilz PSS Series Operating Manual

Interfaces

Programming device interface ("PG")

The programming device interface is a combined RS 232/RS 485
interface. Both interfaces are available on a male 9-pin D-Sub connector.
The interface enables communication between the programming device
and the PSS.
The termination can be activated via links within the connector (see Fig.
8-3 in the section entitled "RS 485 programming device interface").
NOTICE
Never operate the combined RS 232 and RS 485 interface simultaneously
or in parallel. The programmable safety system is not designed for this.
Male D-Sub connector
9-pin
Fig. 8-1: Configuration of the programming device interface
8-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
6
9
RS 232 RS 485
1: RxD 2: R1
5: GND 3: B
6: TxD 4: R2
5: GND
7: A
8: R3
Operating Manual: PSS SB 3006-3 Series