Introduction - Pilz PSS Series Operating Manual

Introduction

This operating manual explains the function and operation of the
programmable safety system, describes the installation and provides
guidelines on how to connect the inputs and test pulse outputs on
programmable safety systems from the PSS SB 3006-3 series. A PSS
from the PSS SB 3006-3 series is a 3rd generation programmable safety
system.
For connection to SafetyBUS p, units are available with one SafetyBUS p
interface as well as two SafetyBUS p interfaces.
This operating manual describes the programmable safety systems from
the PSS SB 3006-3 series with two SafetyBUS p interfaces.
Different interfaces are available for connection to various non-safety-
related standard bus systems, depending on the unit type. These
interfaces are described in separate operating manuals. The necessary
operating manuals are supplied with the relevant unit types.
Please refer to the PSS-range manuals, in particular the information and
requirements stated in the "PSS-Range Safety Manual", "FS System
Description", "ST System Description" and also the "SafetyBUS p
Installation Manual" from the SafetyBUS p manual package.
You will need to be conversant with the information in these manuals in
order to fully understand this manual.
This documentation is intended for instruction and should be retained for
future reference.
Operating Manual: PSS SB 3006-3 Series
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1-1