Pilz PSS Series Operating Manual page 20

6: Programming device interface
7: User interface
8: Pushbutton for switching on and off the RS 485 termination on the
9: Supply voltage connection (24 VDC)
10: Inputs and test pulse outputs
11: LED for status of SafetyBUS p 0
12: SafetyBUS p interface (SafetyBUS p 0)
13: LED for status of SafetyBUS p 1
14: SafetyBUS p interface (SafetyBUS p 1)
15: LEDs for network and module status
16: Rotary switch for setting the transmission rate
17: Rotary switch for setting the station address
18: Connection to DeviceNet
19: Functional earth connection
INFORMATION
Please refer also to the manual: "DeviceNet-Slave for Compact 3rd
Generation PSS".
Operating Manual: PSS SB 3006-3 Series
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
RS 232 (minimum configuration: TxD, RxD, GND)/RS 485
RS 232/RS 485
user interface
2-9