Dedicated Test Pulse Outputs - Pilz PSS Series Operating Manual

Wiring the Inputs and Test Pulse Outputs

Dedicated test pulse outputs

Features:
• 2 test pulse outputs T0 and T1
• The test pulse must be allocated to the input via the configurator on the
programming device (see Programming Manual for the PSS-range).
• Test pulses cannot be addressed via the PSS process I/O-image.
• Test pulses must only be used for test signals.
Please ensure safety regulations and EMC guidelines are met!
7-10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
X1
0 V
T 0
T 1
I 0.0
I 0.1
I 0.2
I 0.3
I 0.4
I 0.5
Test pulse output T0
Test pulse output T1
Operating Manual: PSS SB 3006-3 Series