ICP DAS USA PISO-DNS100-D/T User Manual page 68

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step 4 : Add Slave ID 12
For the convenient, we assumed that we have one virtual slave device in
the network. The ID is 12 with 10 bytes length of input and output. When
pushing the "Add Device 12" button, it would add the virtual slave device into
the PISO-DNS100(U). It is shown as Figure 6.4.2 and Firugre 6.4.3. After
adding it, the uses should reset the firmware in PISO-DNS100(U) by clicking
the "ActiveBoard" button again. Wait for 1 or 2 seconds then go to the next
step.
PISO-DNS100(U) DeviceNet Slave API functions User's Manual (Ver: 1.1)
Figure 6.4.2 "Add Device" OK
Figure 6.4.3 "Add IO Connection" OK
2010/01/07 68