ICP DAS USA PISO-DNS100-D/T User Manual page 63

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
The default baud rate is 125Kbps. If the users want to change the value,
you can select the correct value from the drop-down list. After changing the
baud rate, the uses should reset the firmware in PISO-DNS100(U) by pushing
the "ActiveBoard" button again. Wait for 1 or 2 seconds then go to the next
step.
Step 5 : Add Slave ID 12 and 53
For the convenient, we assumed that we have two virtual slave devices in
the network. It is shown as Figure 6.3.3. One ID is 12 with 1 byte length of
input and output. The other ID is 53 with 2 bytes length of input and output.
When pushing the "Add Device 12" and "Add Device 53" buttons, it would add
these two virtual slave devices into the PISO-DNS100(U). After adding these
virtual slave devices, the uses should reset the firmware in PISO-DNS100(U)
by clicking the "ActiveBoard" button. Wait for 1 or 2 seconds then go to the
next step.
PISO-DNS100(U) DeviceNet Slave API functions User's Manual (Ver: 1.1)
Figure 6.3.3 "Add Device 12" OK
2010/01/07 63