Dns100_Setbaudrate - ICP DAS USA PISO-DNS100-D/T User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

5.3.9 DNS100_SetBaudRate

Description:
This function can set the DeviceNet baud rate of the PISO-
DNS100(U).
DNS100_ResetFirmware or DNS100_ActiveBoard to reset the firmware.
It would make the changes enabled.
Syntax:
DWORD DNS100_SetBaudRate (BYTE BoardNo, BYTE BaudRate)
Parameter:
BoardNo: [input] PISO-DNS100(U) board number (0~15)
BaudRate: [input] The new baud rate value.
Return:
Please refer to Table 5.2.1 and Table 5.2.2.
PISO-DNS100(U) DeviceNet Slave API functions User's Manual (Ver: 1.1)
After calling this
0 : 125K bps
1 : 250K bps
2 : 500K bps
function, you must
2010/01/07
call
47