ICP DAS USA PISO-DNS100-D/T User Manual page 19

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
PISO-DNS100U :
Jumper
JP1
JP2 None.
JP3
Reset button for download error. If users
want to update firmware but the process
is fail, users can click this button to reset
SW2
the PISO-DNS100(U) into download
mode.
JP4 CAN Port 120Ω terminal resistance.
DIP switch is used to set the PISO-
DNS100(U) board No. Switch1 is for
bit0, switch2 is for bit1 and so forth. For
example, if the left-hand-side switch
(switch 1) is ON, the board No. is set to
1. The range of board No. is from 0 to
15. Be careful that the board No. for
DIP switch each board
＊ PISO-CM100-D/T,
＊ PISO-CM100U-D/T,
＊ PISO-DNS100-D/T,
＊ PISO-DNS100U-D/T
＊ PISO-CPM100-D/T
＊ PISO-CPM100-D/T
must be unique.
Table 2.2 Jumper or DIP switch selections for PISO-DNS100U
PISO-DNS100(U) DeviceNet Slave API functions User's Manual (Ver: 1.1)
Description Status
None.
This situation indicates
the board No. 1.
2010/01/07 19