ICP DAS USA PISO-DNS100-D/T User Manual page 12

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
The PISO-DNS100(U) firmware has a "ScanList" to store the virtual slave
devices information. After power off, the information still exists in the EEPROM.
When the users turn on the PC next time, the "ScanList" would be loaded from
the EEPROM. The users can easily use the DLL functions to configure it,
including adding devices or removing devices. It works as shown in Figure
1.5.2. There is more information about the library functions in chapter 5.
Figure 1.5.2 ScanList data structure
PISO-DNS100(U) DeviceNet Slave API functions User's Manual (Ver: 1.1) 2010/01/07 12