ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Step 7 : Read and Write I/O Data
If the master is communicating with the virtual slave device successfully,
the users can read the output I/O data from the master device and write the
input I/O data to the master device in this step. It is shown as Figure 6.3.5. It
would obtain the output I/O data and show them in byte. The users can change
the check-box to write the input data. The output filed would show the value of
the output value.
PISO-DNS100(U) DeviceNet Slave API functions User's Manual (Ver: 1.1)
Figure 6.3.5 Access I/O data
2010/01/07
65