Sam4s ER-900 Series Operation & Programming Manual page 172

Programming the Clerk Report Message
The Clerk Report selection allows you to reprogram the descriptors that appear with
the Clerk Report totals and counters.
For example, the first total on the clerk report "NET SALES" might be re-labeled to say
"GROSS SALES".
You can reprogram any of the Financial Report totals listed here with any 18-
character descriptor. (See "Clerk Report Message").
Character Entry
Keyboard Entry
Character Code Entry
168 
1. Turn the control lock to the PGM position.
2. To begin the program, enter 7 1 0, Then press the SBTL key.
7 1 0
3. Refer to the chart below and enter the number that represents the line
you wish to program; then press the QTY/TIME key.
X QTY/TIME
4. Enter the characters using with the alpha keyboard or code entry mode.
Type up to 18
descriptor keys
Enter up to 18
three-character
codes
5. Press the CASH key to Finish
CASH
SBTL
SBTL
SBTL