Maintenance; Recommended Maintenance Schedule(S) - Toro Reelmaster 3100-D Series Operator's Manual

Maintenance

Note:
Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first hour
After the first 10 hours
After the first 50 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Every 400 hours
Every 500 hours
Every 2 years
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or bystanders.
Remove the key from the ignition before you do any maintenance.
Maintenance Procedure
• Torque the wheel nuts.
• Torque the wheel nuts.
• Check the condition and tension of all belts.
• Change the hydraulic filter.
• Change the oil and the oil filter.
• Check the engine-oil level.
• Check the engine-coolant level.
• Check the level of the hydraulic fluid.
• Check the tire pressure.
• Check the reel-to-bedknife contact.
• Check the interlock system.
• Drain the water separator.
• Clean the radiator and oil cooler.
• Check the hydraulic lines and hoses.
• Check the electrolyte level. (If machine is in storage, check every 30 days.)
• Lubricate all bearings and bushings (lubricate all bearings and bushings daily when
conditions are dusty and dirty).
• Check the condition and tension of all belts.
• Change the oil and the oil filter.
• Torque the wheel nuts.
• Service the air cleaner (more frequently in extreme dusty or dirty conditions).
• Check the parking brake adjustment.
• Change the hydraulic filter.
• Check the fuel lines and connections.
• Replace the fuel filter canister.
• Change the hydraulic fluid.
• Grease the bearings in the rear axle.
• Drain and clean the fuel tank.
• Drain and flush the coolant system (take the machine to an Authorized Service
Dealer or Distributor or refer to the Service Manual).
41