4.
Fill the engine with approximately 3.8 L (4 US
qt) of SAE 15W-40 motor oil.
5.
Start the engine and run it at idle speed for
approximately 2 minutes.
6.
Shut off the engine.
7.
Thoroughly drain all the fuel from the fuel
tank, fuel lines, fuel filter, and water-separator
assembly.
8.
Flush the fuel tank with fresh, clean diesel fuel.
9.
Secure all the fuel-system fittings.
10.
Thoroughly clean and service the air-cleaner
assembly.
11.
Seal the air-cleaner inlet and the exhaust outlet
with weatherproof tape.
12.
Check the antifreeze protection and add
antifreeze/coolant as needed for the expected
minimum temperature in your area.
58