Recall - AT&T PARTNER Installation And Use Manual

Recall

Description
This calling feature causes the system to send a timed switchhook flash over the
telephone line, to "recall" a new dial tone or to access a PBX, Centrex, or local
phone company custom calling feature.
Related Features
If users have trouble with Recall, use Recall Timer Duration (#107) to
adjust the length of the Recall signal. Your local phone company can tell
you the correct setting—for most Centrex systems, the correct setting is 800
msec. (or "32"); for most PBX systems, the correct setting is 450 msec. (or
"18").
You can press [
number, provided it is the first character in the stored number. (For
examples, see Special Dialing Functions.)
Considerations
Using Recall on an intercom call disconnects the call.
Whenever your PBX or Centrex documentation tells you to press the
switchhook when you are on a call, use the Recall feature instead. If you are
already on a call, most PBX or Centrex systems require that you press the
switchhook to get a new dial tone, then dial a feature access code to access
a specific PBX or Centrex service.
Using
To access a PBX, Centrex, or local phone company custom calling feature
(such as Call Waiting) while active on an outside line:
System Phone
On an MLS-18D, MLS-12D, and MLS-12 phone:
1.
Press [
2. Enter the access code for the PBX, Centrex, or local phone company custom
calling feature (if required).
3.
To return to your original call, press [
On an MLS-6 and MLC-6 phone:
1. Dial [
Feature
2. Enter the access code for the PBX, Centrex, or local phone company custom
calling feature (if required).
3. To return to your original call, dial [
] to insert a Recall signal in an Auto Dial or Speed Dial
Spkr
].
Recall
] [ ] [ ].
0 3
] again.
Recall
] [ ] [ ] again.
Feature 0 3
Recall 5-29