AT&T PARTNER Installation And Use Manual page 120

Release 3
Table of Contents

Advertisement

FCC Notification and Repair Information
This equipment is registered with the FCC in accordance with Part 68 of its
rules. In compliance with those rules, you are advised of the following:
Means of Connection: Connection to the telephone network shall be
through a standard network interface jack USOC RJ11C. These USOC
jacks must be ordered from your Telephone Company.
This equipment may not be used with party lines or coin telephone
lines.
Notification to the Telephone Companies: Before connecting this
equipment, you or your equipment supplier must notify your local
telephone company's business office of the following:
– The telephone number(s) you will be using with this equipment.
– The appropriate registration number and ringer equivalence number
(REN), which can be found on the right hand side of the control unit.
– The facility interface code, which is 02LS2.
You must also notify your local telephone company if and when this
equipment is permanently disconnected from the line(s).
Repair Instructions: If you experience trouble because your equipment
is malfunctioning, the FCC requires that you disconnect the equipment
from the network until the problem has been corrected. Repairs to this
equipment can only be made by the manufacturer, its authorized agents,
or by others who may be authorized by the FCC. In the event repairs are
needed on this equipment, please contact the AT&T Helpline at 1 800
628-2888. For warranty information, see Appendix D.
Rights of the Local Telephone Company: If this equipment causes
harm to the telephone network, the local telephone company may
discontinue your service temporarily. If possible, they will notify you in
advance. But if advance notice is not practical, you will be notified as
soon as possible. You will also be advised of your right to file a complaint
with the FCC.
Your local telephone company may make changes in its facilities,
equipment, operations, or procedures that affect the proper
functioning of this equipment. If they do, you will be notified in
advance to give you an opportunity to maintain uninterrupted
telephone service.
Hearing Aid Compatibility: The custom telephones for this system are
compatible with inductively coupled hearing aids as prescribed by the
FCC.
E-2
FCC Information

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PARTNER and is the answer not in the manual?

Questions and answers

Table of Contents