AT&T PARTNER Installation And Use Manual page 81

To make a voice-signaled transfer:
If the extension where you want to transfer the call has a system phone and
you want to signal the user over the phone's speaker, in Step 2 of the
previous procedure press [ ] plus the two-digit extension number.
Your voice is heard through the speaker of the system phone.
To transfer a call with one button touch:
While on a call, press the Auto Dial button for the extension to which you
want to transfer the call. (There is no need to press [
takes the place of Steps 1 and 2 of the previous procedure.)
For an extension that has a system phone, you can store [ ] plus the
extension number on the Auto Dial button, to let you voice-signal calls
over the phone's speaker when you transfer them.
Standard Phone
To pass a call to another extension:
1. While on a call, press the switchhook down once rapidly.
You hear the intercom dial tone.
2. Dial the extension number to which you want the call transferred.
3. When someone answers, announce the call, then hang up.
If no one answers or the call is refused, press the switchhook again to
reconnect to the caller.
If you do not wish to announce the call, hang up as soon as you hear
ringing (in Step 2 above).
To make a voice-signaled transfer:
If the extension where you want to transfer the call has a system phone and
you want to announce the call over the phone's speaker, in Step 2 above
press [ ] plus the two-digit extension number.
Your voice is heard through the speaker of the system phone.
5-40 Transferring Calls
] or [ ]; this
Transfer Hold