Toll Call Prefix (#402) - AT&T PARTNER Installation And Use Manual

Toll Call Prefix (#402)

Description
This system option indicates whether users must dial a 0 (for operator-assisted
calls) or 1 (for direct-dial calls) before an area code when making toll (long
distance) calls, or just the area code and number. This option should be set to
reflect the dialing patterns of your local phone company.
Related Features
This option enables the system to distinguish between local and toll calls, and
only applies if Outgoing Call Restriction (#401) for an extension is set to 3
(Local Only).
Considerations
If you are required by your local phone company to dial 1 before a long distance
number, this option should be set to 1; otherwise, set this option to 2.
Valid Entries
1 = 0 or 1 required before Area Code and Number
2 = Area Code and Number Only
Changing Settings
To change the Toll Call Prefix setting, follow these steps from extension 10:
1 . Press [
Feature
The phone beeps once, and the light next to [
2.
Press left [
The light next to left [
3. Press [ ] [
#
The Message light is red steady if the system is set to recognize long
distance calls when users dial 0 or 1 followed by the area code and
number. If the light is red flash, the system is set to recognize long
distance numbers as the area code and number only.
4. Press [
1
followed by the area code and number, or press [
distance calls are dialed simply by dialing the area code and number.
5. When you are finished, press [
press [
Feature
5-38
Toll Call Prefix (#402)
] [ ] [ ].
0 0
] twice.
Intercom
] is green steady.
Intercom
] [ ] [ ].
4 0 2
] to indicate that long distance calls on your system begin with 0 or 1,
] and a three-digit code for another option or
#
] [ ] [ ].
0 0
] is green flutter.
Spkr
] to indicate that long
2