AT&T PARTNER Installation And Use Manual page 64

Standard Phone
Lift the handset.
1.
You hear intercom dial tone.
2. Dial [ ] to get an outside line.
9
You hear outside dial tone.
3. Dial the phone number.
If you are using a PBX or Centrex line, you may also need to use a dial-out code
(usually 9) before you dial a number outside the PBX or Centrex system.
How to Make an Intercom Call
System Phone
1. You can lift the handset or press [
2. Press an idle [
You hear intercom dial tone, and the light next to the [
steady green.
3.
Ring or voice-signal the extension:
To ring the extension, dial the two-digit extension number or press an
intercom Auto Dial button.
To voice-signal a system phone at the extension, dial [ ] plus the
two-digit extension number or press an intercom Auto Dial button
programmed for voice signaling, When you hear a beep, start talking.
Your voice is heard on the other extension's speaker. If someone is
using the phone at the other extension (or that extension is an MLC-6
phone or a standard phone), it will ring instead.
Standard Phone
1.
Lift the handset.
You hear intercom dial tone.
Ring or voice-signal the extension:
2.
To ring the extension, dial the two-digit extension number.
To voice-signal a system phone at the extension, dial [ ] plus the
two-digit extension number. When you hear a beep, start talking.
Your voice is heard on the other extension's speaker. If someone is
using the phone at the other extension (or that extension is an MLC-6
phone or a standard phone), it will ring instead.
] before dialing.
Spkr
] button.
Intercom
] button is
Intercom
Making Calls 5-23