AT&T PARTNER Installation And Use Manual page 66

Press [ ] [ ] [ ] [ ].
3.
# 6 0 2
The Message light is red steady if the current setting is Tones On Hold, red
wink if it is Music On Hold, or red flash if it is Not Active.
4. Press [ ] to select Tones On Hold, [
1
or [ ] to select Music On Hold.
3
The Message light changes to show the new setting.
5. If you make a mistake, begin again at Step 3.
6. When you are finished, press [
press [ ] [ ] [
Feature 0
] to deactivate Music and Tones On Hold,
2
] and a three-digit code for another option or
#
].
0
Music/Tones On Hold (#602) 5-25