Table of Contents
Advertisement
Dial Mode (#201)
Description
This system option identifies incoming lines as touch-tone or rotary. You should
check with your local phone company if you are not sure which type of line is
being provided to you.
Valid Entries
1 = Touch-Tone lines
2 = Rotary lines
Changing Settings
To change the Dial Mode setting for the system, follow these steps from
extension 10:
1.
Press [
Feature
The phone beeps once, and the light next to [
2.
Press left [
The light next to [
3.
Press [
] [
#
The Message light is red steady if the current setting is Touch-Tone lines,
red flash if the current setting is Rotary lines.
4.
Press [
1
The Message light changes to show the new setting.
5.
If you make a mistake, begin again at Step 3.
6.
When you are finished, press [
press [
Feature
5-12
Dial Mode (#201)
] [
] [
].
0
0
] twice.
Intercom
] is green steady.
Intercom
] [
] [
].
2
0
1
] to select Touch-Tone lines, [
] and a three-digit code for another option or
#
] [
] [
].
0
0
] is green flutter.
Spkr
] to select Rotary lines.
2
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the PARTNER and is the answer not in the manual?
Questions and answers