Table of Contents
Advertisement
Installation
Long Beach Driftwood 1705DWK
Material required
• Long Beach Driftwood Kit, which contains:
• 6 logs
• 10 pebbles
• 1 bag of vermiculite
Installation
Vermiculite
Carefully unpack the kit.
1. Carefully spread vermiculite by hand on the surface
of burner only, forming a single layer to the approxi-
mate level of the top of the fl ange at the edge of the
burner.
Do not pour from the bag and do not pour
too much to avoid blocking the burner ports.
NOTE:
Ensure the area within the pilot shield is clear
of vermiculite. Some vermiculite can be deposited
into the pilot safe zone.
Pilot shield
36
Logs and rocks
Each log has pegs to help you locate it on the media
tray. Install the logs as shown below using the round
holes.
1. Place the rear left log at the left end of the media
tray as indicated. Its narrow end rests on the ver-
miculite as indicated.
Pilot safe zone
Fuel Beds
Round hole—use
the round holes
Advertisement
Table of Contents
