Planning - Valor LX2 2200LKN Installation Manual

Planning

Installer—READ THIS FIRST
1. YOU NEED TO KNOW FROM THE HOMEOWNER:
• Height of appliance and shelf if used;
• HeatShift components;
• Thickness and type of wall fi nish around
appliance;
• Accessories used (optional shelf);
• Venting confi guration - 4 x 6-5/8 or 5 x 8
2. Unpack the appliance and recycle the packaging
EXCEPT THE CARTON PROTECTING THE BARRIER
SCREEN—KEEP IT!
3. Remove front window and all items inside fi rebox.
4. Check that you have everything, using Pack Con-
tent sheet. Also, check that you have:
• fuel bed (packed separately)
• liners (packed separately)
• Remote Battery & Wall Switch Kit RBSWK
• HeatShift Kit (mandatory)
• Gas conversion kit if necessary
• Venting accessories
• Electrical accessories
5. Carefully read the Installer's Checklist included with
the fi replace for the installation sequence.
Please note that the following steps must be done
BEFORE the appliance is placed in its fi nal position in
the cavity since the connections are done from the
back of the appliance:
• electrical connections
• gas connections
• gas conversion (if needed)
• wiring of the Remote Battery & Wall Switck Kit
RBWSK
Caution
Only qualified licensed or trained personnel
should install this appliance.
WARNING
Please note that the HeatShift Kit MUST be
installed on this appliance!
9