Valor LX2 2200LKN Installation Manual page 47

Direct vent zero clearance gas fireplace
Table of Contents

Advertisement

Installation
c. Place the long Y twig as indicated.
d. Place the other short Y twig as indicated.
e. Place the other curvy twig as indicated.
Suggested positions for additional rocks around shale bed
Pilot shield
 WARNING
CHOKING HAZARD! Ensure that the
fireplace area is clear of shale pieces as
these could be ingested by small children.
Vacuum area after installation.
IMPORTANT: Approved for use only with the ceramic
rocks, twigs and shale provided with your Valor fi re-
place The use of any other products may void your
fi replace warranty.
4. Install the remaining rocks around the shale bed.
Do not put any rock on the pilot shield! Do not put
rocks on the shale!
The acceptable variations are only for rocks installed
outside of the shale bed.
Fuel Beds
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lx2 2200rknLx2 2200lkpLx2 2200rkpLx2

Table of Contents