Table of Contents
Advertisement
Installation
2. Carefully spread by hand the embers loosely in a
single layer on the surface around the logs.
pour from the bag neither pile up the embers to
avoid blocking the burner
3. Use the embers to cover the edge of the burner and
the round holes.
1700SWK installed
Do not
ports.
4. Spread some splinters to the embers.
NOTE:
Ensure the areas
pilot safe zone are clear of embers or splinters.
Pilot shield
WARNING
CHOKING HAZARD! Ensure that the
fireplace area is clear of embers/splinters
particles as these could be ingested
by small children. Vacuum area after
installation.
IMPORTANT: Approved for use only with the ce-
ramic embers and splinters provided with your Valor
fi replace The use of any other products may void your
fi replace warranty.
Fuel Beds
within
the pilot shield and
Pilot safe zone
45
Advertisement
Table of Contents
