1.4
Multi-point Power Measurement
By connecting multiple KM series Power Sensors/Monitors (sold separately) to a Power Sensor
Station as its lower units, the momentary power and integral power consumption obtained via
the individual units can be displayed both as the individual values and the total sum of individual
values.
Momentary power values are displayed all the time while the power is ON.
Integral power consumption values are constantly calculated only during the recording, which
has been started by (holding) the SET/REC/STOP key. The display is constantly updated.
When the recording is stopped, the values at the time of the stop are displayed.
Values measured at multiple points can be logged to a single CSV file record.
Note
Up to 100 units of Power Sensor Station can be connected with a PC. (However up to 1024
channels are usable.)
Up to 31 units of Power Sensor/Monitor of the KM series can be connected with one Power
Sensor Station unit.
If there are multiple circuits in one unit, as in the KM-N series, count the number of enabled
circuits as the same number of units.
KMX21
1-6
1. Product Overview