Omron EQUO Series User Manual page 81

(2) Changing Numeric Input Type Item Value (Example: YEAR)
Press the MODE key several times to enter FUN mode, and press the ▼ or ▲ key to display
YEAR.
To display YEAR, ETC and TIME must have been set to DISP beforehand.
Display
(Upper/Lower)
CYCLE
10 s
("FUN" Blinking)
↓
▼ or ▲ Key
YEAR
2010
↓
SET/REC/STOP Key
YEAR
2010
↑ Blinking
↓
▼ or ▲ Key
YEAR
2011
↑ Blinking
↓
SET/REC/STOP Key
YEAR
2011
Use the ▲ or ▼ key again to display other setting item and MODE key to change the operation
mode.
Press the MODE key repeatedly until "FUN" starts blinking.
"CYCLE" is displayed at the upper row.
Press the ▼ or ▲ key to display YEAR. To display YEAR, ETC and
TIME must be set to DISP.
Press the SET/REC/STOP key, then, the last digit number at the lower
row starts blinking.
The value increases or decreases at a press of the ▲ or ▼ key.
The amount of increase/decrease becomes larger by holding ▲ or ▼ key.
To cancel the setting attempt, press the MODE key.
Press the ▲ or ▼ key to display the desired value, and press the
SET/REC/STOP key.
The value is applied and the blinking stops.
4-22
3. Check and Preparation
Operation