Selecting Items - Omron EQUO Series User Manual

4.2.3 Selecting Items

Move the selection items using the ▲ and ▼ keys. To change the set value, select the item
with ▲ or ▼ key and apply the selection with the SET/REC/STOP key. Press the MODE key to
change the operation mode.
CTX21
When TIME is set to ON
When STRIG is set to TIME
When ETRIG is set to TIME
When ETRIG is set to ELPSD
When ETC is set to DISP
4-4
3. Check and Preparation
When CLOCK is set to DISP
When IP is set to DISP
When DTAIL is set to DISP