Omron EQUO Series User Manual page 69

The range of selection (Numeric input):
00:00 to 23:59
Initial value:
00:00
Note
 STIME cannot be specified when STRIG is set to "OFF".
Important
 Recording continues if recording has been already in progress when the specified start time
is reached.
 Recording does not start if the unit is in error status when the specified start time is reached．
End Trigger (ETRIG)
(7)
Sets the recording end trigger.
The range of selection (Options):
OFF / TIME / ELPSD
Setting Value
OFF
TIME
ELPSD
The following item appears when the ▼ key is pressed after the setting is applied with the
SET/REC/STOP key.
Setting Value
OFF
TIME
ELPSD
Initial value:
OFF
Note
 A long press (for 3 seconds or longer) of the SET/REC/STOP key stops recording overriding
the TIME or ELPSD setting.
(8) End Time (ETIME)
Specifies the recording end time.
Recording stops at a specified time every day.
The range of selection (Numeric input):
00:00 to 23:59
Initial value:
00:00
Note
 ETIME cannot be specified when ETRIG is set to "OFF" or "ELPSD".
 Recording stops when the specified end time is reached overriding a record start command
via key operation or communication.
CTX21
A long press (for 3 seconds or longer) of the SET/REC/STOP key stops
recording.
Recording stops when the specified end time is reached.
Recording stops when the specified time has elapsed after the start of
recording.
Item
ETRIG
STIME
STIME
CTX21
4-10
3. Check and Preparation
Operation