Omron EQUO Series User Manual page 68

Timer Setting (TIMER)
(4)
Specifies if the timer function is required.
The range of selection (Options):
OFF / ON
Setting Value
OFF
ON
The following item appears when the ▼ key is pressed after the setting is applied with the
SET/REC/STOP key.
Setting Value
OFF
ON
Initial value:
OFF
Note
 The setting returns to "OFF" when FUN mode is exited, if both Start trigger (STRIG) and End
trigger (ETRIG) are set to "OFF".
Start Trigger (STRIG)
(5)
Sets the recording start trigger.
The range of selection (Options):
OFF / TIME
Setting Value
OFF
TIME
The following item appears when the ▼ key is pressed after the setting is applied with the
SET/REC/STOP key.
Setting Value
OFF
TIME
Initial value:
OFF
Note
 A long press (for 3 seconds or longer) of the SET/REC/STOP key starts recording overriding
the TIME setting.
 If a TIME setting is made, the "REC" indication keeps blinking (indicating that TIME has been
set) until recording starts.
Start Time (STIME)
(6)
Specifies the recording start time.
Recording starts at a specified time every day.
CTX21
The timer function is not used.
Start trigger and End trigger are also set to OFF.
The timer function is used.
Start trigger and End trigger can be specified.
Item
MODE
STRIG
CTX21
A long press (for 3 seconds or longer) of the SET/REC/STOP key starts
recording.
Recording starts when the specified start time is reached.
Item
ETRIG
STIME
CTX21
4-9
3. Check and Preparation
Operation
Operation