Margin Adjustment (Leading Edge/Trailing Edge/Both Sides - Konica Minolta Di1610 Service Manual

(4)

Margin Adjustment (Leading Edge/Trailing Edge/Both Sides)

<Requirement>
A
Mode
Service's Choice
Perform this adjustment in the following cases.
• When the user requests a smaller margin
<Adjustment Procedure>
1. Enter Service's Choice in the Service mode.
2. Select "LEADING EDGE ERASE".
3. Specify the setting.
Setting Overview
To reduce the margin . . . . . Decrease the setting.
To increase the margin . . . . . Increase the setting.
4. Specify settings for the "TRAILING EDGE ERASE" and the "VERTICAL EDGE ERASE"
functions in the same way.
• Specify the amount erased at the leading edge
B
(width of A), trailing edge (width of B), and both
C
sides (width of C) of the paper.
• Default setting: 4 mm
C
4022D503AA
Function Item
Leading Edge Erase
Trailing Edge Erase
Vertical Edge Erase
D-30
Setting Range
0 to 5
1 increment = 1 mm