CE Marking (Declaration of Conformity) .........2-5 For New Zealand Users: ..............2-6 Laser Safety...................2-7 Internal Laser Radiation ..............2-7 CDRH Regulation................2-8 For European Users................2-8 For Denmark Users.................2-8 For Finland, Sweden Users.............2-9 For Norway Users ................2-9 Laser Safety Label ................2-10 Ozone Release ................2-10 Acoustic Noise ................2-11 Di2510/Di3010/Di3510...
Page 3
Printing Distribution Numbers on Sets of Copies ......4-16 To make settings for the “Distribution #” function ......4-16 “Watermark” Function ............... 4-18 Printing Copies with a Watermark ..........4-18 To make settings for the “Watermark” function ......4-18 Di2510/Di3010/Di3510...
Page 4
To set the “Intelligent Sorting” function .........5-25 To set the “Output Tray” function (optional) ........5-26 To set the ““Small” Originals” function...........5-27 To set the “Scanner Dry” function ..........5-28 To set the “Crease/Center Staple” function (Only when the finisher or saddle kit are installed) .......5-29 Di2510/Di3010/Di3510...
Page 5
To disable the Sleep mode............6-10 Account Management Settings ..........6-11 Account Management Mode............6-11 To set the Account Management Mode........6-12 Account Information data.............. 6-14 To print account information data ..........6-14 Clear all counters................6-15 Changing Account Information ............. 6-16 Di2510/Di3010/Di3510...
Page 6
Specifying Settings for Resetting Copy Mode with the Duplexing Document Feeder Installed (Mode 429) ........6-25 Removing Penalties ..............6-26 Unlock ...................6-26 Appendix Specifications................7-2 Copier Di2510/Di3010/Di3510 ............7-2 Duplexing Document Feeder AFR-19 ..........7-4 Mixed Width Document Sizes ............7-4 Duplex Unit AD-16 ................7-5 Switchback Unit SB-1..............7-5 Paper Feed Cabinet PF-124 ............7-5 2Way Paper Feed Cabinet PF-210 ..........7-6...
Page 7
Contents Consumables ................7-21 Paper .................... 7-21 Toner Bottle .................. 7-21 Staple Cartridges................7-22 Index Index ....................8-2 Di2510/Di3010/Di3510...
For details on the following topics, refer to the “Basic Operations” volume of this User Manual. 1 Introduction 2 Available Features 3 Before Making Copies 4 Basic Copy Operations 5 Copy Paper 6 Original Documents 7 Specifying Copy Settings 8 Touch Panel Messages 9 Troubleshooting 10 Index Di2510/Di3010/Di3510...
Administrator Mode functions), procedures for replacing parts and supplies, troubleshooting procedures and machine specifications. Basic Operations This volume contains precautions for using the machine and descriptions on the procedures for basic operations. The Basic Operations volume is a quick reference for immediate use of the copier. Di2510/Di3010/Di3510...
Text formatted in this style provides additional assistance. ➜ Text formatted in this style describes the action that will ensure the desired results are achieved. [Copy] key The names of keys on the control panel are written as shown above. Di2510/Di3010/Di3510...
During printing, paper is supplied from the right side of the copier and fed into the output tray on top or the output option at the left with the printed surface of the page facing down. The paper feed direction is shown by the arrows in the diagram below. Di2510/Di3010/Di3510...
(X), the paper has a horizontal or landscape orientation, indicated by either “C” Portrait and Landscape Portrait With the “portrait” orientation, the paper is vertical, like a portrait. Landscape With the “landscape” orientation, the paper is horizontal, like a landscape. Di2510/Di3010/Di3510...
1.3 Explanation of Basic Concepts and Symbols Display Icons Plain paper Thick paper Overhead projector transparencies Envelope Paper Supply Icons The icons shown below may appear, indicating that no more paper remains. The paper is empty. Di2510/Di3010/Di3510...
® switch to a “low-power mode” after a period of inactivity. An ENERGY STAR product uses energy more efficiently, saves you money on utility bills and helps protect the environment. Di2510/Di3010/Di3510...
This symbol warns against cause burns. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A black circle indicates an imperative course of action. This symbol indicates you must unplug the device. Di2510/Di3010/Di3510...
If you keep on using it as is, a fire or electrical shock could result. Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage. Di2510/Di3010/Di3510...
Dust that accumulates between the plug terminals may cause a fire. • When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock. Di2510/Di3010/Di3510...
This declaration is valid for the area of the European Union. This device must be used with shielded interface cables. The use of non-shielded cable is likely to result in interference with radio communications and is prohibited under EU directives. Di2510/Di3010/Di3510...
Telecom account which may include calls not shown on the log. This equipment should not be used under any circumstances which may constitute a nuisance to other Telecom customers. Not all telephones will respond to incoming ringing when connected to the extension socket. Di2510/Di3010/Di3510...
Therefore, the print head unit should not be opened under any circumstances. Print Head Laser Aperture of the Print Head Unit There is a laser aperture at the location shown above, which must, however, NEVER be viewed directly by the user. Di2510/Di3010/Di3510...
ADVARSEL Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgå udsættelse for stråling. Klasse 1 laser produkt der opfylder IEC60825 sikkerheds kravene. Dansk: Dette er en halvlederlaser. Laserdiodens højeste styrke er 5mW og bølgelængden er 770-795 nm. Di2510/Di3010/Di3510...
Dersom apparatet brukes på annen måte enn spesifisert i denne bruksanvisning, kan brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser klass 1. Dette en halvleder laser. Maksimal effekt till laserdiode er 5mW og bølgelengde er 770-795 nm. Di2510/Di3010/Di3510...
Pour avoir la certitude de travailler dans un environnement réunissant des conditions de confort, santé et de sécurité, il est préférable de bien aérer la pièce ou se trouve l’appareil. 2-10 Di2510/Di3010/Di3510...
2.5 Laser Safety Acoustic Noise For European Users Machine Noise Regulation 3 GSGV, 18.01.1991 : The sound pressure level at the operator position according to EN 27779 is equal to or less than 70dB(A). Di2510/Di3010/Di3510 2-11...
A location that is not near any kind of heating devices Power Source The power source requirements are as follows. Voltage fluctuation: Maximum ±10% Frequency fluctuation: Maximum ±0.3 Hz ❍ Use a power source with as little voltage or frequency fluctuations as possible. Di2510/Di3010/Di3510...
1138 (44-3/4) (4-3/4) 710 (28) 100 (4) 1312 (51-3/4) (12-3/4) (13) (16-1/2) (24-1/4) Unit: mm (inch) Note Be sure to allow a clearance of 100 mm (4 in.) or more at the back of the copier for the ventilation duct. Di2510/Di3010/Di3510...
Always make sure that the copier’s power plug is visible and not hidden by the copier. ✚ Always unplug the copier from the electrical outlet if the unit is not to be used for a long period of time. ✚ Always provide good ventilation when making a large number of continuous copies. Di2510/Di3010/Di3510...
Store in a sealed plastic bag in a cool, dark place paper that has been removed from its wrapper but not loaded into the copier. Only use toner that has been manufactured specifically for this copier. Never use other types of toner. Keep all supplies out of the reach of children. Di2510/Di3010/Di3510...
Copies that are to be kept for a long time should be kept where they are not exposed to light in order to prevent them from fading. Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies. Di2510/Di3010/Di3510...
Copyrighted works without permission of the copyright owner In addition, it is prohibited under any circumstances to copy domestic or foreign currencies, or works of art without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel. Di2510/Di3010/Di3510...
Page 37
3.3 Legal Restrictions on Copying Di2510/Di3010/Di3510...
Load paper for the cover pages with the same orientation and size as the paper for the document. The optional duplexing document feeder must be installed. Cover Mode settings Front Cover: Blank Original Document Copy Back Cover: None Front Cover: Blank Back Cover: Blank Front Cover: Blank Back Cover: With Image Di2510/Di3010/Di3510...
Back Cover: None Front Cover: With Image Back Cover: Blank Front Cover: With Image Back Cover: With Image To make settings for the “Cover Mode” function Load the document into the duplexing document feeder. Touch [Auxiliary], and then touch [Cover Mode]. Di2510/Di3010/Di3510...
Page 41
“Cover Paper”. Select the paper drawer that contains the paper for the cover pages, and then touch [Enter]. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2510/Di3010/Di3510...
This function cannot be used together with the “Cover Mode” function. This function cannot be used together with booklet-printing and mixed original sizes. Note The optional duplexing document feeder must be installed. Paper Insertion settings Blank With Image Di2510/Di3010/Di3510...
“Insert Paper”. Select the paper drawer that contains the paper for the interleaves, and then touch [Enter]. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2510/Di3010/Di3510...
When copying overhead projector transparencies, paper (interleaves) can be in- serted between copies of the transparencies. Load the paper for the interleaves into a paper drawer, and load the overhead projector transparencies into the multiple bypass tray. OHP Interleaving settings Blank With Image Di2510/Di3010/Di3510...
Touch [Auxiliary], and then touch [OHP Interleaving]. Select either the [With Image] or the [Blank] OHP Interleaving setting, and then touch the button below “Insert Paper”. Select the paper drawer that contains the paper for the transparency interleaves, and then touch [Enter]. Di2510/Di3010/Di3510...
Page 46
4.3 “OHP Interleaving” Function Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2510/Di3010/Di3510...
To make settings for the “File Margin” function Load the document into the duplexing document feeder or position it on the original glass. Touch [Auxiliary], and then touch [File Margin]. 4-10 Di2510/Di3010/Di3510...
Page 48
Touch to specify the width of the binding margin, and then touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2510/Di3010/Di3510 4-11...
When copying documents with punch holes, the pages can be printed with part of the document erased. Edge/Frame Erase settings The left side of the document is Original Document Copy erased. The top edge of the document is erased. A frame around the document is erased. 4-12 Di2510/Di3010/Di3510...
[Edge/Frame Erase]. Select the desired Edge/Frame Erase setting. Touch to specify the width of the erased area, and then touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2510/Di3010/Di3510 4-13...
To make settings for the “Image Repeat” function Load the document into the duplexing document feeder or position it on the original glass. Touch [Auxiliary], and then touch [Image Repeat]. Touch [Size Input]. ❍ To automatically detect the document size, touch [Auto Detect]. 4-14 Di2510/Di3010/Di3510...
Page 52
Touch [Y]. Use the 10-Key Pad to type in the length of side Y for the paper that is loaded. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2510/Di3010/Di3510 4-15...
After “999” is printed, the number returns to “000”. To make settings for the “Distribution #” function Load the document into the duplexing document feeder or position it on the original glass. Touch [Auxiliary], and then touch [Image Settings]. Touch [Distribution #]. 4-16 Di2510/Di3010/Di3510...
Page 54
❍ Touch [Darker], [Normal] or [Lighter] to specify the print density for the distribution number. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2510/Di3010/Di3510 4-17...
Copies can be printed with a watermark added to the background. To make settings for the “Watermark” function Load the document into the duplexing document feeder or position it on the original glass. Touch [Auxiliary], and then touch [Image Settings]. Touch [Watermark]. 4-18 Di2510/Di3010/Di3510...
Page 56
❍ If [All Pages] is selected, the watermark is printed on all pages. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2510/Di3010/Di3510 4-19...
The optional hard disk must be installed. To make copies using the “Image Stamping” function Load the document into the duplexing document feeder or position it on the glass. Touch [Auxiliary], and then touch [Image Settings]. Touch [Image Stamping]. 4-20 Di2510/Di3010/Di3510...
Page 58
❍ If [All Pages] is selected, the image is printed on all pages. Touch [Enter]. ❍ If [Cancel] is touched, the setting is cancelled. Press the [Start] key. The copies are printed. Di2510/Di3010/Di3510 4-21...
To set the “Black-White Reverse” function Load the document into the duplexing document feeder or position it on the original glass. Touch [Auxiliary], and then touch [Black-White Reverse]. Press the [Start] key. The copies are printed. 4-22 Di2510/Di3010/Di3510...
After the first document batch is scanned, load the second document batch into the duplexing document feeder or position it on the original glass, and then press the [Start] key. After all document batches have been scanned, touch [Finish]. Press the [Start] key. The copies are printed. Di2510/Di3010/Di3510 4-23...
Page 61
4.11 “Separate Scan” Function 4-24 Di2510/Di3010/Di3510...
Utility mode. Utility screen This screen appears when the [Utility] key is pressed. The following screens appear when the corresponding button is touched. User’s Choice screen This screen provides functions for specifying various default settings for the copier. Di2510/Di3010/Di3510...
This screen shows the total number of copies printed since the copier was installed. Copy Job Program Recall screen From this screen, a programmed copy job can be recalled. User Management screen This screen provides various functions for safely and correctly using the copier. Di2510/Di3010/Di3510...
There are two screens: Administrator Management 1 and Administrator Manage- ment 2. The administrator access code must be entered before these screens can be displayed. For details on the functions available from the Administrator Management screens, refer to “6 Administrator Management Operations”. Di2510/Di3010/Di3510...
Default Copy Output Levels Auto (Lighter, Normal, Darker) Manual One of nine settings between “Lighter” and “Darker” can be selected. Printing Density -2, -1, 0, 1, 2 Output Priority Non-Sort, Sort, Group, Corner Staple*, 2-Point Staple*, Hole Punch* *Options Di2510/Di3010/Di3510...
Page 67
Specify the bin of the finisher (option). “Small” Originals ON, OFF Scanner Dry Specify the time for dehumidifying the scanner. Crease/Center Staple Crease (-10 to +10, 0) Center staple (-10 to +10, 0) Density (ADF only) Mode 1, Mode 2 Di2510/Di3010/Di3510...
If [ON] is selected, the previously copied image data can be printed again, even after copying has finished or while the copier is stand-by. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510...
Press the [Utility] key. Touch [User’s Choice]. Touch [1/6], and then touch [Mixed Original Detection]. Touch [ON] or [OFF], and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510...
Press the [Utility] key. Touch [User’s Choice]. Touch [1/6], and then touch [Language Selected for LCD]. Select the desired language, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510...
Touch [User’s Choice]. Touch [2/6], and then touch [Original Ö Copy Default]. Select the desired setting, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-10 Di2510/Di3010/Di3510...
Press the [Utility] key. Touch [User’s Choice]. Touch [2/6], and then touch [Auto Paper/Auto Size]. Select the desired setting, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510 5-11...
Press the [Utility] key. Touch [User’s Choice]. Touch [2/6], and then touch [Drawer Priority]. Select the desired paper drawer, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-12 Di2510/Di3010/Di3510...
Selecting this mode will mean that double sided copies on paper in that paper tray will not be possible. ❍ : Special paper Selecting this mode will mean that when using auto paper selection, this will not be included in auto tray change. Di2510/Di3010/Di3510 5-13...
Touch [ON] or [OFF], and then touch [Enter]. ❍ If [OFF] is selected, specify the Zoom settings for the 2in1 and 4in1 Copy settings. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-14 Di2510/Di3010/Di3510...
Use the 10-Key Pad to specify the desired length of time, and then touch [Enter]. (Specify a length of time between 1 and 240 minutes.) Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510 5-15...
(Specify a length of time between 1 and 240 minutes.) ❍ Selecting the [No Reset] key means that sleep functions will no longer operate. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-16 Di2510/Di3010/Di3510...
LCD Back-light being set to off, then the Backlight will be turned off after the specified preheat or sleep time. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510 5-17...
The length of time until the Basics screen is displayed can be set to 30 seconds, 1, 2, 3 or 5 minutes, or “No Reset”. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-18 Di2510/Di3010/Di3510...
Touch [User’s Choice]. Touch [3/6], and then touch [Plug- In Counter, ID key Reset]. Touch [ON] or [OFF], and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510 5-19...
Touch [4/6], and then touch [4in1 Copy Order]. Select the page orientation for making 4in1 copies, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-20 Di2510/Di3010/Di3510...
[Auto] or [Manual]. ❍ The default Original Image Type can be set to [Text], [Photo] or [Text/Photo]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510 5-21...
[Lighter], [Normal] or [Darker]. ❍ The default Manual density level can be adjusted by one level at a time. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-22 Di2510/Di3010/Di3510...
Press the [Utility] key. Touch [User’s Choice]. Touch [4/6], and then touch [Printing Density]. Select the desired settings, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510 5-23...
Press the [Utility] key. Touch [User’s Choice]. Touch [4/6], and then touch [Output Priority]. Select the desired settings, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-24 Di2510/Di3010/Di3510...
“Sort” setting is automatically selected when a document consisting of two or more pages is placed in the duplexing document feeder. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510 5-25...
Touch [User’s Choice]. Touch [5/6], and then touch [Output Tray]. Select the appropriate output tray settings, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-26 Di2510/Di3010/Di3510...
❍ If [OFF] is selected, a message appears, indicating that the paper should be selected. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510 5-27...
[Enter]. ❍ Specify the time in the 24-hour format. ❍ To erase the value, press the [C] key. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-28 Di2510/Di3010/Di3510...
Press the [Utility] key. Touch [User’s Choice]. Touch [5/6], and then touch [Crease/Center Staple]. Touch to adjust the setting, and then touch [Enter]. Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510 5-29...
(such as those created with a word processor). 2: The setting on the right is most appropriate for scanning faint document (such as those written with pencil). Touch [END] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 5-30 Di2510/Di3010/Di3510...
A maximum of five images can be registered. For details on using the “Im- age Stamping” function, refer to ““Image Stamping” Function” on page 4-20. Note The optional hard disk must be installed. To register an image stamp Press the [Utility] key. Touch [User Set]. Touch [Image Mem. Input]. Di2510/Di3010/Di3510 5-31...
Page 93
(between 25 and 432 mm). Touch [Y], and then press the [C] key to erase the current value. Use the 10-Key Pad to type in the length of side Y for the image document (between 25 and 297 mm). Touch [Enter]. 5-32 Di2510/Di3010/Di3510...
Page 94
5.4 Registering an Image Stamp Position the document on the glass, and then select the orientation of the document. Press the [Start] key. The image is scanned. The image stamp is registered. Di2510/Di3010/Di3510 5-33...
To view the counters Press the [Utility] key. Touch [Meter Count]. After checking the various counters, touch [Exit]. ❍ There are two Meter Count screens. To view the other screen, touch [Next]. Touch [Exit] to return to the Basics screen. 5-34 Di2510/Di3010/Di3510...
Touch [Check], and then touch a number button. Check the programmed settings. ❍ To display screen 2/2, touch [Next]. To return to screen 1/2, touch [Back]. Touch [Enter] to return to the Mode Check screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510 5-35...
[Delete]. ❍ The copy program is deleted, appears on the button. Touch [Exit] to return to the Mode Check screen, and then touch [Exit] to return to the Basics screen. 5-36 Di2510/Di3010/Di3510...
Touch the button assigned with the copy program that you wish to use. ❍ Only buttons that have been assigned a copy program are displayed. Check the settings, and then touch [Enter]. Set the document, and press the [Start] key. Di2510/Di3010/Di3510 5-37...
(Default setting: 3) ✔ [Alarm Volume]: This function is used to adjust the volume of the alarm that is sounded when a paper misfeed occurs or an incorrect operation is specified. (Default setting: 3) 5-38 Di2510/Di3010/Di3510...
To clean the touch panel (“Panel Cleaning” function) By setting panel cleaning, you can clean the panel without accidentally pressing panel buttons. Press the [Utility] key. Touch [User Management], and then touch [Panel Cleaning]. ❍ To cancel the function, press the [Panel Reset] key. Di2510/Di3010/Di3510 5-39...
If this occurs, toner can be replenished. Press the [Utility] key. Touch [User Management], and then touch [Toner Replenisher]. The toner is replenished. 5-40 Di2510/Di3010/Di3510...
Administrator Management screen is denied. To allow access to the Administrator Management screen, turn the machine off, then on again, and then type in the correct administrator code. Keep the administrator code in a safe place hidden from the general user. Di2510/Di3010/Di3510...
Page 104
Network Scan Kit (or Internet Fax & Network Scan Kit) For details, refer to “To set the Account Management Mode” on page 6-12. If “Copy Track Mode” is set to “1000 Accounts” or “OFF”, neither the [Account Reg] nor the [Account Counter] keys will appear. Di2510/Di3010/Di3510...
To set the date and time Follow the procedure described in “To display the Administrator Management screens” on page 6-2 to display the Administrator Management screen. Touch [Admin. 1], and then touch [Initial Settings]. Touch [Date/Time Set]. Touch [TimeDate]. Di2510/Di3010/Di3510...
To set the time zone Follow the procedure described in “To display the Administrator Management screens” on page 6-2 to display the Administrator Management screen. Touch [Admin. 1], and then touch [Initial Settings]. Touch [Date/Time Set]. Di2510/Di3010/Di3510...
Page 107
Touch [TimeZone]. Touch to adjust the setting, and then touch [Enter]. ❍ The time difference can be adjusted in 30-minute intervals. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510...
Touch [Administrator Code Input]. Touch [Current Code], and then use the 10-Key Pad to type in the currently specified 8-digit administrator code. ❍ Press the [C] key to erase all entered text. ❍ To return to the previous screen, touch [Cancel]. Di2510/Di3010/Di3510...
Page 109
To change the administrator code, turn the machine off, then on again, and then type in the correct administra- tor code. Di2510/Di3010/Di3510...
Use the 10-Key Pad to specify the maximum number of copies, and then touch [Enter]. ❍ Numbers between 1 and 99 can be specified. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510...
User’s Choice screen. On the User’s Choice [3/6] sleep mode setting screen, select [No]. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 6-10 Di2510/Di3010/Di3510...
Network scan kit or Internet Fax & Network Scan Kit [1000 Accounts] Enter the account number to make copies. Additionally, the following can be configured per account. ❍ Total counter: displays the total counter value for each account. Additionally, clears the counter value Di2510/Di3010/Di3510 6-11...
Select [Yes], and touch [Enter]. Note When programming or chang- ing account information data, please set the default account information data. However, de- pending on the currently spec- ified account information method, the default screen may not be displayed. 6-12 Di2510/Di3010/Di3510...
Page 114
When setting [100 Accounts 1] or [100 Accounts 2], please program account names, etc. for each account. Please refer to “Account Registration” for de- tails. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510 6-13...
Set A4 L paper in the 1st paper drawer, then press the [Start] key. Account management data is printed. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 6-14 Di2510/Di3010/Di3510...
[Interrupt] key. If you wish to clear the total counter of other accounts, re- peat steps 4 and 5. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510 6-15...
[C] key. Use the 10-Key Pad to type in the value you wish to change. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 6-16 Di2510/Di3010/Di3510...
6-2 to display the Administrator Management screen. Touch [Admin. 1], and then touch [Account management]. Touch [Copy Track Data]. Touch the page number key for the account to be registered. Note All account counter data can be deleted by touching [All Counter Reset]. Di2510/Di3010/Di3510 6-17...
Page 119
Scan Kit (or Internet Fax & Network Scan Kit) is installed> Follow the procedure described in “To display the Administrator Management screens” on page 6-2 to display the Administrator Management screen. Touch [Admin. 1], and touch [Account Reg]. Select the account key to program or change. 6-18 Di2510/Di3010/Di3510...
Page 120
6.5 Setting Account Registration Touch [Account Name]. To enter the name of the account, use the character buttons that appear in the touch panel. Touch [Enter]. Touch [Access Number], and enter the access code for the account. Touch [Enter]. Di2510/Di3010/Di3510 6-19...
Page 121
Where you wish to change the programmed details, repeat from step 3, en- tering the correct details. To delete programmed details, at step 4, press the [Delete] key. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. 6-20 Di2510/Di3010/Di3510...
Touch the button for the account whose counter you wish to view, and then touch [Enter]. After checking the counter, then touch [Enter]. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510 6-21...
Follow the procedure described in “To display the Administrator Management screens” on page 6-2 to display the Administrator Management screen. Touch [Admin. 2], and then touch [Access Lock]. To use the “Access Lock” function, touch [ON]. To stop using the “Access Lock” function, touch [OFF]. 6-22 Di2510/Di3010/Di3510...
Page 124
6.6 Setting Machine Access Touch [Enter]. ❍ To return to the previous screen, touch [Cancel]. Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen. Di2510/Di3010/Di3510 6-23...
* Do not change these bits. Specifies whether or not Do not clear Copy mode is reset after a Clear copy job scanned using the duplexing document feeder is finished 4, 3, 2, 1, 0 00000 * Do not change these bits. Di2510/Di3010/Di3510 6-25...
For more details, refer to the User Manual for the printer controller. In addition, to allow access after incorrect attempts to access Administrator mode, turn the machine off, then on again. 6-26 Di2510/Di3010/Di3510...
7.1 Specifications Specifications Copier Di2510/Di3010/Di3510 Specification Type Desktop Platen Fixed platen (mirror scanning) Photo conductor Copying system Digital laser copying Developing system MTHG developing method Fusing system Heat-roller-fixing system Resolution 600 dpi Document Types: Sheets, books Size: Maximum A3 L, Weight: 3 kg...
Page 130
For A4 C paper loaded into the 1st drawer: 35 sheets/min. (A4 C) Di3010 For A4 C paper loaded into the 1st drawer: 30 sheets/min. (A4 C) Di2510 For A4 C paper loaded into the 1st drawer: 25 sheets/min. (A4 C) Full size: × 1.000 Magnification ratios Enlargement ratios: ×...
A3 L, B4 L, A4 L/C, B5 L/C Paper capacity 500 sheets (80 g/m Power requirements Supplied by main unit Power consumption Less than 15 W 570 mm (width) × 548 mm (depth) × 263 mm (height) Dimensions Weight About 22 kg Di2510/Di3010/Di3510...
) × 4 Paper capacity Maximum 125 sheets (80 g/m 624 mm (width) × 503 mm (depth) × 390 mm (height) Dimensions Weight About 8 kg (unit weight), less than 12 kg (gross weight) Power requirements Supplied by finisher Di2510/Di3010/Di3510...
Set the power switch of the copier to “O” before cleaning it. Housing cover ➜ Clean the surface of the housing cover by wiping it with a soft cloth dampened with a mild household detergent. Original glass ➜ Clean the original glass by wiping it with a soft, dry cloth. Di2510/Di3010/Di3510...
In addition, never use mild household detergent or glass cleaner to clean the operation panel or touch panel. Original glass ➜ Clean the original glass by wiping it with a soft, dry cloth. 7-10 Di2510/Di3010/Di3510...
7.3 Function Combination Table Function Combination Table Di2510/Di3010/Di3510 7-11...
Page 139
7.3 Function Combination Table 7-12 Di2510/Di3010/Di3510...
Page 140
7.3 Function Combination Table Di2510/Di3010/Di3510 7-13...
Page 141
7.3 Function Combination Table 7-14 Di2510/Di3010/Di3510...
Page 142
:The settings can be specified, but the function selected first is not performed. :The settings can be specified, but the function selected later is not performed. :This setting cannot be selected since the “Booklet Creation” setting is not selected. Di2510/Di3010/Di3510 7-15...
Page 143
:This setting cannot be selected since the “Book” setting cannot be selected. I: A warning message should appear. I: The settings can be selected, but either the function will automatically be cancelled or the function is not performed. 7-16 Di2510/Di3010/Di3510...
8 in. × 10 in. 203 mm × 254 mm Quarto 5-1/2 in. × 8-1/2 in. 140 mm × 216 mm Statement Invoice 4 in. × 6 in. 4 in. × 6 in. 102 mm × 152 mm Di2510/Di3010/Di3510 7-17...
257 mm × 364 mm × 0.577 10 in. × 14-1/4 in. × 0.707 × 0.500 × 1.154 × 0.816 182 mm × 257 mm × 0.577 7-1/4 in. × 10 in. × 0.707 × 1.640 × 1.154 × 1.414 7-18 Di2510/Di3010/Di3510...
Page 146
11 in. × 17 in. × 1.294 11 in. × 14 in. × 1.076 × 0.647 Letter Invoice 8-1/2 in. × 11 in. 11 in. × 17 in. × 1.294 215.9 mm × 279.4 mm 11 in. × 14 in. × 1.272 Di2510/Di3010/Di3510 7-19...
Page 147
11 in. × 14 in. × 1.647 139.7 mm × 215.9 mm × 1.545 Legal × 1.529 Foolscap × 1.294 Letter Zoom ratio = Paper size/Document size 1 in. (inch) = 25.4 mm 1 mm = 0.0394 in. (inch) 7-20 Di2510/Di3010/Di3510...
Note Only use toner that has been manufactured specifically for this copier. Do not throw away the used toner cartridges. Instead, keep them in their boxes to be collected by your service representative. Di2510/Di3010/Di3510 7-21...
7.5 Consumables Staple Cartridges MS-5D for the finisher Staples for staple binding 5,000 staples are provided in the staple cartridge. MS-2C for the saddle kit Staples for staple binding 2,000 staples are provided in the staple cartridge. 7-22 Di2510/Di3010/Di3510...
Page 151
Consumables ..................7-21 Copy program ................... 5-35 Cover mode .................4-2 Crease/Center staple ................ 5-29 Date and time ..................6-4 Density ..................5-21 5-23 Distribution # ..................4-16 Drawer priority ................... 5-12 Duplex unit ..................7-5 Duplexing document feeder ..............7-4 Di2510/Di3010/Di3510...
Page 152
Large capacity cabinet .................7-6 LCD back-light off ................5-17 Legal restrictions on copying ...............3-7 Mail bin kit ....................7-7 Memory recall ..................5-7 Meter count ..................5-34 Mixed original detection ...............5-8 Mixed width document sizes ..............7-4 Multiple-in-1 2in1 copy ..................5-14 4in1 copy ................5-14 5-20 Di2510/Di3010/Di3510...
Page 153
Scanner dry ..................5-28 Separate scan ................... 4-23 Sleep mode ..................5-16 Soft switches ..................6-24 Space requirements ................3-3 Special paper ..................5-13 Specifications ..................7-2 Specify the date and time ..............6-4 Staple cartridges ................7-22 Switchback unit ................... 7-5 Di2510/Di3010/Di3510...
Page 154
8.1 Index Time zone ....................6-5 Toner bottle ..................7-21 Toner replenisher ................5-40 Unlock ....................6-26 User management ................5-38 Utility mode ..................5-2 Watermark ..................4-18 Zoom ratios ..................7-18 Di2510/Di3010/Di3510...
Page 156
For the protection of the global environment and human welfare, this manual was printed using soy ink. Copyright 2003 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. Printed in Japan The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers.