Advertisement
Quick Links
I. Accessory parts
No.
Name
1. Shoulder screw
2. Mounting screw
3. Chart
4. Installation
Manual
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting your head in the wrapper involves
danger of suffocation.
4582-7701-03
DF-601
Automatic Document Feeder
INSTALLATION MANUAL
Shape
Q'ty
2
4582U010AA
2
4582U011AA
1
1
set
4980IXC019DA
II. Installation procedures
1. Turn off the machine and unplug the power cord
from the power outlet.
2. Remove the two hinge covers at two places
(one screw each).
Note:
When the spacer is mounted, remove the spacer.
Spacer
3. Screw the shoulder screws furnished with the
Automatic Document Feeder into the holes in the
rear (one screw each).
E-1
Applied Machine: C250
COLOR MFP 25 ppm
for Product Code 4038
4582IXC002DB
4582IXC001DA
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Konica Minolta DF-601
Summary of Contents for Konica Minolta DF-601
- Page 1 DF-601 Automatic Document Feeder INSTALLATION MANUAL Applied Machine: C250 COLOR MFP 25 ppm for Product Code 4038 I. Accessory parts II. Installation procedures 1. Turn off the machine and unplug the power cord Name Shape Q’ty from the power outlet.
- Page 2 III. Adjusting the Document Feeding Tray 4. Place the Automatic Document Feeder in posi- tion. Width Note: When installing the Automatic Document Feeder, 1. Plug the power cord into the power outlet and turn on the machine. hold onto the upper and lower ends of the Auto- 2.
- Page 3 IV. Checking and Adjusting Document 6. Touch “Max. Width” and then press the Start key. Check that “Adjustment Result” is “OK.” Skew 1. Place the chart in the document feeding tray (with the side having an arrow facing up). 4582IXE509DA 7.
- Page 4 V. Checking and Adjusting the Document 5. Loosen the two front screws on the right hinge. If the gap A is wider than gap B, move the Auto- Feeding Tray Reference Position matic Document Feeder toward the front. If the gap B is wider than gap A, move the Auto- 1.
- Page 5 VI. Adjusting the Document Stop Position 6. Loosen the screw (two on the front side and three on the backside) on the document feeding tray. 1. Display the Service Mode screen. If the crease deviates on the side of A, move the (For details of how to display the Service Mode tray to the front.
- Page 6 5. Place the chart in the document feeding tray 12.Touch “Main Scanning Direction.” (with the side having an arrow facing up). 4582IXE514DA 4582U003AA 13.Place the chart in the document feeding tray 6. Press the Start key. (with the side having an arrow facing up). 7.
Need help?
Do you have a question about the DF-601 and is the answer not in the manual?
Questions and answers