Konica Minolta Di1610 Service Manual page 97

Function
TEST To adjust for variations in the accu-
COPY racy of IR parts and their mounting
accuracy by varying the scanning
start position in the sub-scanning
CCD
direction.
SUB
✽ When the Upper Cover Assy.
REGIST
ADJUST
✽ When the Scanner Assy. has
TEST To adjust for variations in the accu-
COPY racy of all parts and their mounting
accuracy by varying the scanning
ADF zoom ratio in the sub-scanning
SUB direction when using the Automatic
ZOOM Document Feeder.
ADJUST
✽ When the Upper Cover Assy.
TEST To adjust for variations in the accu-
COPY racy of all parts and their mounting
accuracy by varying the scanning
ADF start position in the main scanning
MAIN direction when using the Automatic
REGIST Document Feeder.
ADJUST
✽ When the Upper Cover Assy.
TEST To adjust for variations in the accu-
COPY racy of all parts and their mounting
accuracy by varying the scanning
ADF start position in the sub-scanning
SUB direction when using the Automatic
REGIST Document Feeder.
ADJUST
✽ When the Upper Cover Assy.
To specify the 8-digit serial num-
ber.
SERIAL NO.
• Once the serial number is speci-
To specify the customer ID.
CUSTOMER ID • Once the customer ID is speci-
Purpose
(Original Glass) has been
replaced
been replaced
(Original Glass) has been
replaced
(Original Glass) has been
replaced
(Original Glass) has been
replaced
fied, "SERIAL NO." does not
appear in the "ADJUST" menu.
fied, "CUSTOMER ID" does not
appear in the "ADJUST" menu.
S-15
Setting Details/Precautions
Press the Start key to begin
printing the test page.
The setting range is 90 to 110.
(1 increment = 0.5 mm)
Press the Start key to begin
printing the test page.
The setting range is 95 to 105.
(1 increment = 0.4%)
Press the Start key to begin
printing the test page.
The setting range is 90 to 110.
(1 increment = 0.5 mm)
Press the Start key to begin
printing the test page.
The setting range is 90 to 110.
(1 increment = 0.5 mm)
–
• The default setting is "0"
(Minolta).
0 (Minolta) 1 (OEM1)
2 (Generic)