(2)
C0210: H.V. abnormal
<Detection Timing>
• The Drum Charge Monitor Voltage (HVC_MON) signal falls outside a predetermined
range at any time after the lapse of a predetermined period of time after the Power
Switch has been turned ON.
• The Image Transfer Voltage Monitor signal (T_MON_V) and Image Transfer Current
Monitor signal (T_MON_I) fall outside a corresponding predetermined range.
<Troubleshooting Procedures>
Fusing Unit
Step
Action
1
Replace Fusing Unit.
2
Replace PWB-P.
Description
Relevant Electric Parts
Controller/Mechanical Control Board (PWB-P)
Ref. Page
Control Signal
–
–
T-15
WIRING DIAGRAM
Location
(Electric Parts)
–
–
–
–