Table of Contents

Advertisement

Quick Links

User Manual

www.konicaminolta.net
Di1610fp

Advertisement

Table of Contents
loading

Summary of Contents for Konica Minolta Di1610fp

  • Page 1: User Manual

    User Manual www.konicaminolta.net Di1610fp...
  • Page 2: Table Of Contents

    Acoustic Noise................1-15 Notice for Ni-MH Batteries............1-15 ® Energy Star ................1-16 ® What is an ENERGY STAR Product? ........1-16 Explanation of Manual Conventions .........1-17 Explanation of Basic Concepts and Symbols ......1-18 Paper Feeding ................1-18 “Width” and “Length”..............1-19 Paper Orientation ..............1-19 Di1610fp...
  • Page 3 Default Settings................ 3-16 Useful Functions ................ 3-17 Panel Resetting................ 3-17 Auto Panel Reset ..............3-17 Energy Save Mode ..............3-17 Auto Print Start................. 3-18 Auto Tray Switching ..............3-18 Entering Text................3-19 Changing Input Mode............... 3-19 Inputting Example ..............3-20 Di1610fp...
  • Page 4 PCL Font List................3-41 3.11 Print Area ..................3-42 Making Copies Making a Basic Copy ..............4-2 Selecting the Paper...............4-4 Manual Paper Selection .............4-4 Selecting Manually Fed Paper............4-4 Manually Selecting the Paper Size..........4-4 Specifying the Size and Type of Manually Feed Paper....4-5 Di1610fp...
  • Page 5 Checking Transmission Results ..........5-15 To check the transmission result ..........5-15 Fax Transmission/Reception Methods Transmission Methods ..............6-2 Memory Transmission..............6-2 To specify Memory TX ............... 6-2 Direct Transmission ..............6-3 Manual Transmission ..............6-4 To send a fax manually .............. 6-5 Di1610fp...
  • Page 6 Specifying the Setting for “PRINT DENSITY”......7-9 Specifying the Setting for “LCD CONTRAST” ......7-10 Specifying the Setting for “LANGUAGE” ........7-11 Specifying the Setting for “LAMP OFF TIME”......7-12 Specifying the Setting for “BUZZER VOLUME”......7-13 Specifying the Setting for “INITIAL MODE” ......7-14 Di1610fp...
  • Page 7 To change/delete a programmed relay initiation transmission ................7-52 Specifying the Setting for “BATCH TX” ........7-54 To set batch transmitting............7-54 To change the batch transmission setting ....... 7-55 To delete the batch transmission setting ......... 7-56 Specifying the Setting for “MAILBOX”........7-57 Di1610fp...
  • Page 8 Specifying the Setting for “USER FAX NO.”......7-80 Specifying the Setting for “USER NAME”.........7-81 When a Message Appears When the Message “PAPER EMPTY” Appears ......8-2 Loading Paper into Tray1 ............8-3 Loading Paper into the Bypass Tray ..........8-3 Loading Paper into Tray2 (Optional) ..........8-4 Di1610fp...
  • Page 9 Faxes Cannot Be Sent ............. 8-31 Faxes Cannot Be Received ............. 8-32 Calls Cannot Be Sent............... 8-33 Miscellaneous Specifications ................9-2 Di1610fp..................9-2 Auto Document Feeder .............. 9-3 Paper Feed Cassette PF-125 ............ 9-3 List of Utility/Function Menu Commands........9-4 Utility Menu Commands ............. 9-4 Function Menu Commands............
  • Page 10 Contents Glossary..................9-9 Terms and Definitions..............9-9 Paper Size and Zoom Ratio Tables ...........9-10 Paper Sizes ................9-10 Zoom Ratios ................9-11 10 Index 10.1 Index.....................10-2 Di1610fp...
  • Page 11 Contents Di1610fp...
  • Page 12: Introduction

    Introduction...
  • Page 13: We Want You To Be A Satisfied Customer

    1.1 We Want You to Be a Satisfied Customer We Want You to Be a Satisfied Customer Thank you for choosing the Di1610fp. This User Manual describes the functions, operating procedures, precautions, and basic troubleshooting for the Di1610fp. Before using this machine, be sure to read the User Manual thoroughly in order to ensure that you use the machine efficiently.
  • Page 14: For Canada Users Interference-Causing Equipment Standard (Ices-003 Issue 3)

    This device must be used with shielded interface cables. The use of non-shielded cable is likely to result in interference with radio communications and is prohibited under CISPR 22 rules and local rules. Di1610fp...
  • Page 15: Safety Information

    This symbol warns against possible causes of burns. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A black circle indicates an imperative course of action. This symbol indicates you must unplug the device. Di1610fp...
  • Page 16: Warning

    If you keep on using it as is, a fire or electrical shock could result. Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage. Di1610fp...
  • Page 17: Caution

    Dust that accumulates between the plug terminals may cause a fire. • When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock. Di1610fp...
  • Page 18: Precautions For Routine Use

    • The cooling fan may be activated automatically, but this suggests no problems. • Ni-MH (Nickel Metal Hydride) Batteries are installed inside machine as back up memory batteries. Please dispose according to local, state and federal regulations. Di1610fp...
  • Page 19: Safety Information

    If they do, you will be given advance notice so as to give you an opportunity to maintain uninterrupted service. If you experience trouble with this equipment, please contact: Konica Minolta Business Solutions U.S.A.,Inc. 100 Williams Drive Ramsey. New Jersey 07446 U.S.A...
  • Page 20: Warning For Setting Of Header And Footer

    Repairs to certified equipment should be made by an authorized Canadian maintenance facility designed by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Di1610fp...
  • Page 21: Laser Safety

    Ringer Equivalence Numbers of all the devices does not exceed five. REN=0.2 If you experience trouble with this equipment, please contact: Konica Minolta Business Solutions (Canada) Ltd. 369 Britannia Road East, Mississauga, Ontario L4Z 2H5 Canada...
  • Page 22: Cdrh Regulation

    Laser products marketed in the United States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration of the U.S. Department of Health and Human Services (DHHS). This means that the device does not produce hazardous laser radiation. Di1610fp 1-11...
  • Page 23: For European Users

    LOUKAN 1 LASERLAITE KLASS 1 LASER APPARAT VAROITUS! Laitteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Tämä on puolijohdelaser. Laserdiodin sunrin teho on 15 mW ja aallonpituus on 770- 800 nm. 1-12 Di1610fp...
  • Page 24 Det här är en halvledarlaser. Den maximala effekten för laserdioden är 15 mW och våglängden är 770-800 nm. VARO! Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. Älä katso säteeseen. VARNING! Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad. Betrakta ej strålen. Di1610fp 1-13...
  • Page 25: For Norway Users

    1. Dette en halvleder laser. Maksimal effekt till laserdiode er 15 mW og bølgelengde er 770-800 nm. Laser Safety Label A laser safety label is attached to the outside of the machine as shown below. 1-14 Di1610fp...
  • Page 26: Ozone Release

    EN 27779 is equal to or less than 70dB(A). Notice for Ni-MH Batteries Ni-MH (Nickel Metal Hydride) Batteries are installed inside machine as back up memory batteries. Please dispose according to local, state and federal regulations. Di1610fp 1-15...
  • Page 27: Energy Star

    ® switch to a “low-power mode” after a period of inactivity. An ENERGY STAR product uses energy more efficiently, saves you money on utility bills and helps protect the environment. 1-16 Di1610fp...
  • Page 28: Explanation Of Manual Conventions

    Text formatted in this style provides additional assistance. ➜ Text formatted in this style describes the action that will ensure the desired results are achieved. [Copy] key The names of keys on the control panel are written as shown above. Di1610fp 1-17...
  • Page 29: Explanation Of Basic Concepts And Symbols

    During printing, paper is supplied from the front side of the machine and fed into the Copy Tray on top with the printed surface of the page facing down. The paper feed direction is shown by the arrows in the diagram below. 1-18 Di1610fp...
  • Page 30: Width" And "Length

    (B), the paper has a vertical or portrait orientation, indicated by either “L” or Crosswise ( If the width (A) of the paper is longer than the length (B), the paper has a horizontal or landscape orientation, indicated by either “C” or Di1610fp 1-19...
  • Page 31 1.6 Explanation of Basic Concepts and Symbols 1-20 Di1610fp...
  • Page 32: Precaution

    Precaution...
  • Page 33: Installation Precautions

    A location that is not near any kind of heating devices Power Source The power source requirements are as follows. Voltage Fluctuation: AC110V -10%, AC127V +6%, or AC220-240 V ±10% Frequency Fluctuation: Within ±3Hz ❍ Use a power source with as few voltage or frequency fluctuations as possible. Di1610fp...
  • Page 34: Space Requirements

    When lifting the machine, be sure to grab the handles on the left and right sides from the rear of the machine. If the machine is lifted from its front, it may become unbalanced and fall. Di1610fp...
  • Page 35: Operation Precautions

    A negligible amount of ozone is generated during normal operation of this machine. An unpleasant odor may, however, be detected in poorly ventilated rooms during extensive machine operations. ➜ For a comfortable operating environment, it is recommended that the room be well ventilated. Di1610fp...
  • Page 36: Transporting The Machine

    Keep all supplies out of the reach of children. CAUTION Be careful not to spill toner inside the machine or get toner on your clothes or hands. ➜ If your hands become soiled with toner, immediately wash them with soap and water. Di1610fp...
  • Page 37: Legal Restrictions On Copying

    Copyrighted works without permission of the copyright owner In addition, it is prohibited under any circumstances to copy domestic or foreign currencies, or works of art, without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel. Di1610fp...
  • Page 38: Before Making Copies Or Faxing

    Before Making Copies or Faxing...
  • Page 39: Available Features

    The main copy settings available with this machine are listed below. For details on their operation, refer to the pages indicated. Copies 1-sided copies (p. 4-2) 2in1 copies (p. 4-14) Zoom Ratio Reduced/Full Size/Enlarged (p. 4-10) Finishing Sort (p. 4-15) Di1610fp...
  • Page 40: Components And Their Functions

    3.2 Components and Their Functions Components and Their Functions Main Unit Di1610fp Paper Feed Cassette PF-125 (option) Capable of holding up to 500 sheets of paper. 32MB Memory M32-5 (option) Increases the machine’s memory. By increasing the machine’s memory, more pages can be scanned.
  • Page 41: Parts Names And Their Functions

    Description Auto Document Feeder Automatically feeds one document sheet at a time for scanning. Original Glass Place your original on this glass to allow the machine to scan it. The original is to be placed face down. (p. 3-32) Di1610fp...
  • Page 42 Used for connecting to a standard telephone line. line 1 (LINE PORT 1) USB Port For details, refer to the User Manual for the printer controller. Parallel Port For details, refer to the User Manual for the printer controller. Fuser Cover Not used Di1610fp...
  • Page 43: Auto Document Feeder

    Open when clearing an original that has been misfed. (p. 8-19) Cover (Doc. Feed Cover) Document Guide Plate Slide the guide plate to the size of the originals. (p. 3-31) Document Exit Tray Receives originals which have been scanned by the machine. Di1610fp...
  • Page 44: Inside The Machine

    3.3 Parts Names and Their Functions Inside the Machine Part Name Description Imaging Cartridge Generates the print image. The Imaging Cartridge is constructed of both the Drum Cartridge and the Toner Cartridge set into place. Di1610fp...
  • Page 45: Adjusting The Angle Of The Copy Tray

    2. When back curled paper is fed out 3. When clearing a paper misfeed or replacing the Drum Cartridge or Toner Cartridge Note Adjust the Tray Extension and Paper Stopper to fit the size of the paper. For Legal-size paper For A4-size paper For Letter-size paper Di1610fp...
  • Page 46: Options

    Internet Fax & Network By installing the Internet Fax & Network Scan Kit SU-6 together with the Scan Kit Network Interface Card NC-5, the network scanning and Internet faxing functions can be performed. * The internal options are not shown. Di1610fp...
  • Page 47: Control Panel

    • Use to enter the number of copies to be made and any other numeric date. • Used to enter text such as a name. • In the Fax mode, use the [ ] key for tone transmission (with pulse dialing) and use the [#] key for accessing an outside line. 3-10 Di1610fp...
  • Page 48 • Redials the last number called. • While dialing, used to generate a pause when transferring from an internal to an external line or receiving information services. [Speed Dial] key Used to dial previously programmed fax numbers represented by 3-digit numbers. Di1610fp 3-11...
  • Page 49: Display Indications

    Displays the currently specified zoom ratio. Number of copies Displays the currently specified number of copy pages and number of copy sets. Image density Displays the currently specified image density. Paper Displays the currently selected paper tray, paper size and paper type. 3-12 Di1610fp...
  • Page 50: Symbol List

    The paper setting for the Manual Bypass Tray is a custom paper size. Dialing A fax number is being dialed. Ringing The machine is being called. Sending The document is being sent. Receiving A document is being received. Di1610fp 3-13...
  • Page 51 A document is queued for polling transmission. transmission In standby for mailbox A document is queued for mailbox reception. reception In standby for memory A document is queued for memory reception or polling reception. reception or polling reception 3-14 Di1610fp...
  • Page 52: Turning The Machine On/Off And The Initial Mode

    Auto Document Feeder or by placing a document on the Original Glass, and pressing the [Start] key. Pressing the [Start] key at this time will not immediately start the print cycle. You will have to wait for less than 25 seconds (at an ambient temperature of 73.4°F). Di1610fp 3-15...
  • Page 53: Default Settings

    Factory default settings Number of copies: 1 Image density: TEXT Auto Zoom ratio: 100% (full size) Paper: Tray1 Finishing: Non-Sort The default settings can be customized from the Utility mode. For details, refer to “Utility Mode” on page 7-2. 3-16 Di1610fp...
  • Page 54: Useful Functions

    To cancel the Energy Save mode, press any key on the control panel. The length of time before the machine enters the Energy Save mode can be set between 1 min and 240 min. For details, refer to “Specifying the Setting for “ENERGY SAVE MODE”” on page 7-6. Di1610fp 3-17...
  • Page 55: Auto Print Start

    If the optional Paper Feed Cassette is installed, a maximum of 750 pages can be continuously printed. Tray1 → Tray2 (Paper Feed Cassette) Tray2 (Paper Feed Cassette) → Tray1 Auto tray switching can be disabled. For details, refer to “Setting Up the Paper Sources” on page 7-15. 3-18 Di1610fp...
  • Page 56: Entering Text

    * To switch the input mode of the 10-Key Pad between numbers and letters, press the [123/ABC] key. Changing Input Mode Each press of the [123/ABC] key switches the input mode between numbers and letters. [1]: Numbers can be typed in. [A]: Letters can be typed in. Di1610fp 3-19...
  • Page 57: Inputting Example

    Press the [6] key 3 times. Press the [3] key 7 times. Ö Press the [ ] key. Press the [3] key 7 times. Press the [4] key 7 times. Press the [2] key 7 times. Press the [3] key 6 times. 3-20 Di1610fp...
  • Page 58 If the same 10-Key Pad is needed to enter two characters in a row, press the [Ö ] key after selecting the first character. (Refer to the above example.) To enter a space, press 10-Key Pad [0]. Di1610fp 3-21...
  • Page 59: Copy Paper

    Specify the size and type of paper that is loaded. Paper loaded into the Bypass Tray is given priority during feeding. The size of FLS is preset to 13 × 8-1/4. To change the FLS size, contact a service representative. 3-22 Di1610fp...
  • Page 60: Unsuitable Paper

    Paper of a non-standard shape (not rectangular) Paper that is bound with glue, staples or paper clips Paper with labels attached Paper with ribbons, hooks, buttons, etc. attached Curled or wrinkled paper Art paper, coated paper or inkjet printer paper Di1610fp 3-23...
  • Page 61: Loading Paper

    When loading additional paper, remove any paper remaining in the drawer, place it on top of the new paper, and then align the paper in the stack well before loading it into the drawer. 3-24 Di1610fp...
  • Page 62 <Tray1> Only 1 envelope at a time can be loaded in Tray1 and the Bypass Tray. We recommend replenishing the paper only after all of the paper in the drawer has been used. Di1610fp 3-25...
  • Page 63: Loading Paper Into Tray1

    Slide the paper guides against the edges of the paper. <When Legal-size paper is installed> ❍ If Legal-size paper is installed, open the door of Tray1. Attach the Bypass Tray in its original position. 3-26 Di1610fp...
  • Page 64 If paper with a different size or type is loaded, various settings must be specified from the “PAPER SOURCE SETUP” menu in the Utility mode. If the settings are not correctly specified, paper size error may occur. For details, refer to “Specifying the Setting for “TRAY SETTING”” on page 7-19. Di1610fp 3-27...
  • Page 65: Loading Paper Into The Bypass Tray

    When paper is loaded into the Bypass Tray, the paper size and type must be specified, otherwise paper size error may occur. For details, refer to “Specifying the Size and Type of Manually Feed Paper” on page 4-5. 3-28 Di1610fp...
  • Page 66: Loading Paper Into Tray2 (Optional)

    Load the paper into the drawer so that the front side of the paper (the side facing up when the package was unwrapped) faces up. Attach the drawer cover, and then return the drawer for Tray2 to its original position. Di1610fp 3-29...
  • Page 67: Loading Originals

    Coated originals such as carbon-backed paper Up to 25 Letter-size document pages can be scanned and stored in the memory at one time. However, if the optional expansion memory is installed, up to 180 scanned pages can be stored. 3-30 Di1610fp...
  • Page 68: Loading Originals Into The Auto Document Feeder

    Document Guide Plate to the size of the originals. Specify the desired copy or fax settings. ❍ “Making Copies” on page 4-1 ❍ “Basic Faxing” on page 5-12 Press the [Start] key to start feeding and copying the originals from the top page. Di1610fp 3-31...
  • Page 69: Placing The Original On The Original Glass

    While scanning with the Auto Document Feeder open, do not look directly at the bright light that may shine through the Original Glass. Although the light that shines through the Original Glass is bright, it is not a laser beam and, therefore, is not as dangerous. 3-32 Di1610fp...
  • Page 70: Positioning A Sheet Original

    Original Scales. Gently lower the Auto Document Feeder. Specify the desired copy or fax settings. ❍ “Making Copies” on page 4-1 ❍ “Basic Faxing” on page 5-12 Press the [Start] key to start the print cycle. Di1610fp 3-33...
  • Page 71: Positioning Highly Transparent Originals

    Gently lower the Auto Document Feeder. Specify the desired copy or fax settings. ❍ “Making Copies” on page 4-1 ❍ “Basic Faxing” on page 5-12 Press the [Start] key to start the print cycle. 3-34 Di1610fp...
  • Page 72: Positioning Books

    Original Glass is bright, it is not a laser beam and, therefore, is not as dangerous. Specify the desired copy or fax settings. ❍ “Making Copies” on page 4-1 ❍ “Basic Faxing” on page 5-12 Press the [Start] key to start the print cycle. Di1610fp 3-35...
  • Page 73: Checking The Machine Status

    Prints the recipients programmed for the speed dial numbers. KEY SETTING LIST Prints the settings specified for one-touch dial keys. MACHINE STATUS Prints the current machine status. CONFIGRATION PAGE Prints the current machine configuration. PCL FONT LIST Prints the font list. 3-36 Di1610fp...
  • Page 74: Checking The "Total Page" Counts

    3.10 Checking the Machine Status Checking the “TOTAL PAGE” Counts Press the [Status] key. Status Press the [Yes] key. Press the [M] and [L] keys to check the “TOTAL COUNT”, “TOTAL SCAN”, “TX PAGES” or “RX PAGES” values. Di1610fp 3-37...
  • Page 75: Checking The "Tx/Rx Result

    If the [No] key is pressed twice while the transmission results are displayed, the main screen appears. ❍ To print the transmission result report, press the [Start] key. After the transmission result report is printed, the main screen appears. 3-38 Di1610fp...
  • Page 76: To Output A Report/List

    The reception/transmission result reports can be checked on screen. For details on viewing the transmission result, refer to “Checking the “TX/RX RESULT”” on page 3-38. The following reports and lists can be printed. Di1610fp 3-39...
  • Page 77: Tx Result Report

    098765432 0003 APR.19 19:12 TX--- HEAD OFFICE 00:00'56" 024682468 Memory Data List This is a list of documents stored in the memory and waiting to be sent, and documents specified for timer transmission, batch transmission or polling reception. 3-40 Di1610fp...
  • Page 78: Memory Image Print

    Machine Status The current machine settings are printed. Configuration Page The list of the printer settings is printed. PCL Font List The list of fonts can be printed in order to be checked. Di1610fp 3-41...
  • Page 79: Print Area

    For details on using the machine to print from a computer when the printer controller is installed, refer to the User Manual for the printer controller. A: 1/4 (at full size) B: 1/4 (at full size) C: 1/4 (at full size) Paper output direction 3-42 Di1610fp...
  • Page 80: Making Copies

    Making Copies...
  • Page 81: Making A Basic Copy

    The following procedure describes how to place an original and make a basic copy of it. Position the original. ❍ “Loading Originals” on page 3-30 Select the paper tray. ❍ “Selecting the Paper” on page 4-4 Specify the zoom ratio. ❍ “Specifying the Zoom Ratio” on page 4-10 Di1610fp...
  • Page 82 This will start the print cycle. ❍ To stop the print cycle in mid- operation, press the [Stop] key. ❍ To cancel the print job, press the [No] key or the [Panel Reset] key. ❍ To restart the print cycle, press the [Start] key. Di1610fp...
  • Page 83: Selecting The Paper

    “Specifying the Zoom Ratio” on page 4-10 ❍ “Adjusting the Image Density” on page 4-12 Using the 10-Key Pad, enter the number of copies to be made, and then press the [Start] key. This will start the print cycle. Di1610fp...
  • Page 84: Specifying The Size And Type Of Manually Feed Paper

    Press the [ ] and [Ö ] keys until the desired paper type is selected. Ö Pressing the [ ] and [ ] keys moves “ ” to select the paper type. To return to the previous message, press the [No] key. Press the [Yes] key. Di1610fp...
  • Page 85 4, the only paper sizes that can be loaded are A4 and Letter. Ö Pressing the [ ] and [ ] keys moves “ ” to select the paper size. To return to the previous message, press the [No] key. Di1610fp...
  • Page 86 Tray 1 are the width and the length. Enter the value by mm using the 10-Key Pad. Refer to the conversion rate below. 1 inch = 25.4 mm Bypass Tray Di1610fp...
  • Page 87 Using the 10-Key Pad, enter the number of copies to be made, and then press the [Start] key. To change the number of copies to be made, remove the paper from the Bypass Tray and then reload it. Repeat steps 11 and 12. Di1610fp...
  • Page 88 4.2 Selecting the Paper Note The Bypass Tray can be loaded with a maximum of 1 envelope, 1 OHP transparency, 1 card, or 10 sheets of plain paper. Di1610fp...
  • Page 89: Specifying The Zoom Ratio

    Pressing the [M] or [L] key increases or decreases the zoom ratio in × 0.01 increments. and [L] keys The ratio can range from × 0.50 to × 2.00. Full Size This setting makes a copy the same size as the original (× 1.00). 4-10 Di1610fp...
  • Page 90: Setting The Zoom Ratio

    Make the other necessary settings. ❍ “Selecting the Paper” on page 4-4 ❍ “Adjusting the Image Density” on page 4-12 Using the 10-Key Pad, enter the number of copies to be made, and then press the [Start] key. Di1610fp 4-11...
  • Page 91: Adjusting The Image Density

    Select “Photo” when making a copy from an original having large halftone images, such as photos. Setting the Image Density Position the original. ❍ “Loading Originals” on page 3-30 Press the [Auto/Photo] key on the control panel to select the desired mode. 4-12 Di1610fp...
  • Page 92 Make the other necessary settings. ❍ “Selecting the Paper” on page 4-4 ❍ “Specifying the Zoom Ratio” on page 4-10 Using the 10-Key Pad, enter the number of copies to be made, and then press the [Start] key. Di1610fp 4-13...
  • Page 93: Making 2In1 Copies

    Make the other necessary settings. ❍ “Selecting the Paper” on page 4-4 ❍ “Adjusting the Image Density” on page 4-12 Using the 10-Key Pad, enter the number of copies to be made, and then press the [Start] key. 4-14 Di1610fp...
  • Page 94: Finishing Copies

    Non-Sort: <Copying 1 set> The copies are stacked on top of each other as they are made. <Copying 3 sets> Sort: Documents containing multiple <Copying 3 sets> pages can be printed and automatically separated into the individual sets. Di1610fp 4-15...
  • Page 95: Specifying Sorting

    “Selecting the Paper” on page 4-4 ❍ “Specifying the Zoom Ratio” on page 4-10 ❍ “Adjusting the Image Density” on page 4-12 Using the 10-Key Pad, enter the number of print to be made, and then press the [Start] key. 4-16 Di1610fp...
  • Page 96: Faxing

    Faxing...
  • Page 97: Dialing

    If the [Redial/Pause] key is pressed while entering the fax number, a 3- second pause is added. A pause appears as “P” in the display. ➜ If you wish to change the fax number, press the [No] key, and then enter the correct number. Di1610fp...
  • Page 98: To Fax Using One-Touch Dialing

    If necessary, change the “Resolution” setting (p. 5-11). Press the one-touch dial key ([01] through [15]) programmed with the fax number that you wish to send the fax to. Press the [Start] key. The machine automatically starts scanning the document and sending the fax. Di1610fp...
  • Page 99: To Fax Using Speed Dialing

    10-Key Pad to enter the 3-digit speed dial number. Has the wrong speed dial number been entered? ➜ Press the [No] key, and then enter the correct number. Press the [Start] key to begin scanning and sending the fax. Di1610fp...
  • Page 100: To Fax Using Group Dialing

    If necessary, change the “Resolution” setting (p. 5-11). Press the one-touch dial key ([01] through [15]) programmed with the group of fax numbers that you wish to send the fax to. Press the [Start] key. The machine automatically starts scanning the document and sending the fax. Di1610fp...
  • Page 101: To Fax Using Chain Dialing

    After the message “SET DOC. FACE UP” appears, use the 10- Key Pad to enter the recipient’s fax number. After the message “SET DOC. FACE UP” appears, load the document into the Automatic Document Feeder. Press the [Start] key. Di1610fp...
  • Page 102: To Fax Using Program Dialing

    Press the one-touch dial key ([12] through [15]) programmed with the desired function. Press the [Start] key. The programmed function automatically begins. To cancel a timer transmission, select “CANCEL RESERV.” from the “FUNCTION” menu (p. 6-19). Di1610fp...
  • Page 103: To Fax Using The Phone Book

    Search for the desired recipient by entering part (or all) of the name programmed. For details on performing the search, refer to “To search the phone book” on page 5-9. Press the [Start] key to begin scanning and sending the fax. Di1610fp...
  • Page 104: To Search The Phone Book

    ➜ After “(0)” is displayed, the screen allowing you to enter the search text appears. To narrow down the search results even further, press the [Yes] key, and then enter more search text. Press the [Yes] key. Di1610fp...
  • Page 105: To Redial The Last Recipient Called

    Load the document into the Automatic Document Feeder. If necessary, change the “Resolution” setting (p. 5-11). Press the [Redial/Pause] key. The fax number of the last recipient called is displayed. Press the [Start] key to begin scanning and sending the fax. 5-10 Di1610fp...
  • Page 106: Transmission Settings

    If the Half Tone or Super Fine + Half Tone setting is specified, the fax may be sent with a decreased resolution depending on the quality of the recipient’s fax machine or whether the document size is larger than the paper loaded in the recipient’s fax machine. Di1610fp 5-11...
  • Page 107: Basic Faxing

    Press the [Start] key to begin scanning and sending the fax. ❍ To stop the transmission, press the [Stop] key. Once transmission is finished, a beep is sounded. If the fax could not be sent, the transmission result report is printed (p. 7-77). 5-12 Di1610fp...
  • Page 108: To Fax Documents Positioned On The Original Glass

    Lift open the Automatic Document Feeder, and then position the document to be faxed on the Original Glass. ❍ Position the document face down. ❍ Align the document on the scales above and to the left of the Original Glass. Di1610fp 5-13...
  • Page 109: If The Memory Becomes Full While Scanning Fax Documents

    If the transmission is canceled, the data for the scanned pages is deleted. After the other fax transmission or reception is finished, check the amount of memory available, and then try sending the fax again. 5-14 Di1610fp...
  • Page 110: Checking Transmission Results

    If the [No] key is pressed twice while the transmission results are displayed, the main screen appears. ❍ To print the transmission result report, press the [Start] key. After the transmission result report is printed, the main screen appears. Di1610fp 5-15...
  • Page 111 5.4 Checking Transmission Results 5-16 Di1610fp...
  • Page 112: Fax Transmission/Reception Methods

    Fax Transmis- sion/Reception Methods...
  • Page 113: Transmission Methods

    Load the document face up. If necessary, change the “Resolution” setting (p. 5-11). Press the [Memory TX] key, and then check that the Memory TX lamp lights up. Note If the Memory TX lamp is not lit, the direct transmission is selected. Di1610fp...
  • Page 114: Direct Transmission

    Original Glass. If direct transmission is specified while a fax is being sent or received, the transmission will be queued. With direct transmission, multiple recipients cannot be specified. Direct transmission and timer transmission cannot be performed at the same time. Di1610fp...
  • Page 115: Manual Transmission

    If the fax is to be sent after talking on the telephone, use the Automatic Document Feeder. Manual transmission is possible if a telephone (either purchased or rented) is connected to the TEL port of this machine. Even when pulse dialing is being used, entering “ ” produces signals for tone dialing. Di1610fp...
  • Page 116: To Send A Fax Manually

    Replace the telephone receiver. ❍ To stop the transmission, press the [Stop] key. If the [Speaker] key is pressed instead of picking up the telephone receiver, the speaker can be used for manual transmission in the same way as described above. Di1610fp...
  • Page 117: Batch Transmission

    Press the [Start] key to begin scanning the document. The document is automatically sent at the specified time. To cancel a batch transmission, select “CANCEL RESERV.” from the “FUNCTION” menu (p. 6-19). Di1610fp...
  • Page 118: Broadcast Transmission

    Position the document to be faxed. If necessary, change the “Resolution” setting (p. 5-11). Press the [Function] key. Press the [1] key from the 10-Key Pad. Press the [Function] key once to select “BROADCAST”, and then press the [Yes] key. Di1610fp...
  • Page 119 Press the [No] key to delete the current selection. (This is valid only before the recipient is set by pressing the [Yes] key.) Press the [Start] key. A message appears, allowing you to select whether or not to check the recipients. Di1610fp...
  • Page 120 Check the recipient, and then press the [Yes] key. ❍ To delete the displayed recipient, press the [No] key. After all recipients have been checked, “Fin.=START” appears in the display. Press the [Start] key to begin scanning and sending the fax. Di1610fp...
  • Page 121: Timer Transmission

    If necessary, change the “Resolution” setting (p. 5-11). Press the [Function] key. Press the [2] key from the 10-Key Pad. Press the [Function] key twice to select “TIMER TX”, and then press the [Yes] key. A screen appears, allowing you to specify the transmission time. 6-10 Di1610fp...
  • Page 122 [No] key, and then enter the correct time. Specify the fax number of the recipient. ❍ Refer to “Dialing” on page 5-2. Press the [Start] key. The machine scans the document, then enters transmission standby mode. Di1610fp 6-11...
  • Page 123: Mailbox Transmission

    Press the [Function] key 3 times to select “MAILBOX TX”, and then press the [Yes] key. Specify the recipient, and then press the [Yes] key. ❍ Refer to “Dialing” on page 5-2. A screen appears, allowing you to specify the mailbox ID. 6-12 Di1610fp...
  • Page 124 ❍ If you wish to correct the password, press the [No] key, and then enter the new number. Press the [Start] key to begin scanning and sending the fax. Di1610fp 6-13...
  • Page 125: Relay Initiation Transmission

    Position the document to be faxed. If necessary, change the “Resolution” setting (p. 5-11). Press the [Function] key. Press the [7] key from the 10-Key Pad. Press the [Function] key 7 times to select “RELAY INITIATE”, and then press the [Yes] key. 6-14 Di1610fp...
  • Page 126 ❍ If you wish to correct the password, press the [No] key, and then enter the new number. Press the [Start] key to begin scanning and sending the fax. Di1610fp 6-15...
  • Page 127: Polling Transmission

    ❍ To allow only one polling transmission request, then delete the document from the memory, select “SINGLE”. ❍ To allow multiple polling transmission requests, select “MULTI”. The document is stored in the memory until it has been deleted. 6-16 Di1610fp...
  • Page 128 If you do not wish to set a password, continue with step ❍ The password can be set to any number between 0000 and 9999. Press the [Start] key. The machine scans the document, then enters standby mode. Di1610fp 6-17...
  • Page 129: To Delete A Document From The Polling Transmission Setup

    [Yes] key. Press the [No] key to delete from the memory the document set for polling transmission. ❍ To keep the polling transmission setting, press the [Yes] key. Press the [No] key twice to return to the main screen. 6-18 Di1610fp...
  • Page 130: Canceling (Deleting) A Document Queued In The Memory For Transmission

    POLL-RX: Polling reception RELAY: Relay initiation transmission FORWARD: Fax forwarding ❍ To check the recipient of the currently displayed transmission job, press the [Ö ] key. After checking, press the [Yes] key to return to the previous screen. Di1610fp 6-19...
  • Page 131 Press the [Yes] key to delete the displayed job. “FUNCTION” menu appears in the display. To delete another queued job, repeat steps 2 and 4. ❍ If you are finished deleting jobs, press the [No] key to return to the main screen. 6-20 Di1610fp...
  • Page 132: Reception Methods

    Memory reception is set using the corresponding Utility mode function. For details on changing the setting, refer to “Specifying the Setting for “MEMORY RX MODE”” on page 7-65. Di1610fp 6-21...
  • Page 133: Mailbox Reception

    Press the [Function] key 4 times to select “PRINT MAILBOX RX”, and then press the [Yes] key. A screen appears, allowing you to enter the mailbox ID. Using the 10-Key Pad, enter the 4- digit mailbox ID, and then press the [Yes] key. 6-22 Di1610fp...
  • Page 134: Polling Reception

    Refer to step 5 of “To fax using broadcast transmission” on page 6-7. To enter the polling ID and password, press the [M] key. ❍ If there is no need to enter a polling ID and password, skip to step 7. Di1610fp 6-23...
  • Page 135 Check the fax numbers, and then press the [Yes] key. ❍ To delete the displayed fax number, press the [No] key. ❍ After all fax numbers have been checked, “Fin.=START” appears in the display. Press the [Start] key. 6-24 Di1610fp...
  • Page 136: Using F Codes

    Ask your partner, if their machine can process F code transmissions. If one-touch dial keys or speed dial numbers are programmed with F codes (SUB and SID), the appropriate F code can quickly be transmitted to the recipient/caller. Di1610fp 6-25...
  • Page 137: Using Mailboxes

    Refer to “Specifying the Setting for “MAILBOX”” on page 7-57. If one-touch dial keys or speed dial numbers are programmed with F codes, the appropriate F code can quickly be transmitted. Refer to “Mailbox Transmission” on page 6-12. 6-26 Di1610fp...
  • Page 138: Specifying F Codes

    Programming F codes F codes can be specified when programming one-touch dial keys or speed dial numbers. For details on programming F codes, refer to “Setting Up the Fax Registration” on page 7-33 in “7 Using the Utility Mode”. Di1610fp 6-27...
  • Page 139 6.3 Using F codes 6-28 Di1610fp...
  • Page 140: Using The Utility Mode

    Using the Utility Mode...
  • Page 141: Utility Mode

    (NC-5). E-MAIL SETTING 1 Available only if the optional Internet Fax & Network Scan Kit SU-6 is installed. For details, refer to the User Manual for the Internet Fax & E-MAIL SETTING 2 Network Scan Kit (SU-6). SCAN SETTING Di1610fp...
  • Page 142: Specifying The Machine Settings

    • The manufacturer’s default setting is “LOW”. INITIAL MODE This function can be used to set the mode (Copy mode or Fax mode) that the machine starts up in or returns to after the Control Panel is reset. • The manufacturer’s default setting is “COPY”. Di1610fp...
  • Page 143: Selecting The "Machine Setting" Menu

    5 PRINT DENSITY 6 LCD CONTRAST 7 LANGUAGE 8 LAMP OFF TIME 9 BUZZER VOLUME 0 INITIAL MODE To quit changing the machine settings, press the [No] key. “STOP SETTING?” appears. Press the [Yes] key to quit changing the settings. Di1610fp...
  • Page 144: Specifying The Setting For "Auto Panel Reset

    If “OFF” was selected, “MACHINE SETTING” appears again. Note If “OFF” was selected, the Auto Panel Reset function is disabled. Press the [ ] and [Ö ] keys to select the desired time period (min). Press the [Yes] key. Di1610fp...
  • Page 145: Specifying The Setting For "Energy Save Mode

    Energy Save mode. The timer can be set between 1 min and 240 min. If an incorrect value is entered, press the [No] key, and then enter the correct value. Press the [Yes] key. Di1610fp...
  • Page 146: Specifying The Setting For "Density (Adf)

    Specifying the Setting for “DENSITY (ADF)” Select the “DENSITY (ADF)”. ❍ Refer to “Selecting the “MACHINE SETTING” menu” on page 7-4. Press the [ ] and [Ö ] keys to select either “Mode 1” or “Mode 2”. Press the [Yes] key. Di1610fp...
  • Page 147: Specifying The Setting For "Density (Book)

    Specifying the Setting for “DENSITY (BOOK)” Select the “DENSITY (BOOK)”. ❍ Refer to “Selecting the “MACHINE SETTING” menu” on page 7-4. Press the [ ] and [Ö ] keys to select either “Mode 1” or “Mode 2”. Press the [Yes] key. Di1610fp...
  • Page 148: Specifying The Setting For "Print Density

    Select the “PRINT DENSITY”. ❍ Refer to “Selecting the “MACHINE SETTING” menu” on page 7-4. Press the [ ] and [Ö ] keys to select one of the seven print density levels between “LIGHT” and “DARK”. Press the [Yes] key. Di1610fp...
  • Page 149: Specifying The Setting For "Lcd Contrast

    Select the “LCD CONTRAST”. ❍ Refer to “Selecting the “MACHINE SETTING” menu” on page 7-4. Press the [ ] and [Ö ] keys to select one of the four display contrast levels between “LIGHT” and “DARK”. Press the [Yes] key. 7-10 Di1610fp...
  • Page 150: Specifying The Setting For "Language

    7.2 Specifying the Machine Settings Specifying the Setting for “LANGUAGE” Select the “LANGUAGE”. ❍ Refer to “Selecting the “MACHINE SETTING” menu” on page 7-4. Press the [M] and [L] keys to select the desired language. Press the [Yes] key. Di1610fp 7-11...
  • Page 151: Specifying The Setting For "Lamp Off Time

    Specifying the Setting for “LAMP OFF TIME” Select the “LAMP OFF TIME”. ❍ Refer to “Selecting the “MACHINE SETTING” menu” on page 7-4. Press the [ ] and [Ö ] keys to select either “Mode 1” or “Mode 2”. Press the [Yes] key. 7-12 Di1610fp...
  • Page 152: Specifying The Setting For "Buzzer Volume

    Specifying the Setting for “BUZZER VOLUME” Select the “BUZZER VOLUME”. ❍ Refer to “Selecting the “MACHINE SETTING” menu” on page 7-4. Press the [ ] and [Ö ] keys to set the buzzer volume to “HIGH”, “LOW” or “OFF”. Press the [Yes] key. Di1610fp 7-13...
  • Page 153: Specifying The Setting For "Initial Mode

    Specifying the Setting for “INITIAL MODE” Select the “INITIAL MODE”. ❍ Refer to “Selecting the “MACHINE SETTING” menu” on page 7-4. Press the [ ] and [Ö ] keys to select either “COPY” or “FAX”. Press the [Yes] key. 7-14 Di1610fp...
  • Page 154: Setting Up The Paper Sources

    ❍ The PAPER SOURCE SETUP functions are as follows: 1 TRAY1 PAPER 2 TRAY SETTING To quit setting up the paper sources, press the [No] key. “STOP SETTING?” appears. Press the [Yes] key to quit changing the settings. Di1610fp 7-15...
  • Page 155: Specifying The Setting For "Tray1 Paper

    3, the only paper sizes that can be loaded are Letter L and A4 L. Ö Pressing the [ ] and [ ] keys moves “ ” to select the paper size. To return to the previous message, press the [No] key. 7-16 Di1610fp...
  • Page 156 Enter the value by mm using the 10-Key Pad. Refer to the conversion rate below. 1 inch = 25.4 mm Press the [Yes] key. Di1610fp 7-17...
  • Page 157 Note The paper length can range from 140 mm (5-1/2) to 356 mm (14). Enter the value by mm using the 10-key Pad. Refer to the conversion rate below. 1 inch = 25.4 mm Press the [Yes] key. 7-18 Di1610fp...
  • Page 158: Specifying The Setting For "Tray Setting

    A tray can be selected only if the optional Paper Feed Cassette is installed. Press the [Yes] key. Press the [ ] and [Ö ] keys to select either “FIXED” (auto tray switching disabled) or “CONTINUOUS” (auto tray switching enabled). Press the [Yes] key. Di1610fp 7-19...
  • Page 159: Specifying User Management Settings ("User Management" Menu)

    “USER MANAGEMENT” menu: USER MANAGEMENT Description CHANGE D/C This function is used to specify when the drum cartridge will need to be replaced. For details on replacing the drum cartridge, refer to “Replacing the Drum Cartridge” on page 8-10. 7-20 Di1610fp...
  • Page 160: To Select The "User Management" Menu

    7.4 Specifying User Management Settings (“USER MANAGEMENT” Menu) To select the “USER MANAGEMENT” menu Press the [Utility] key three times. “USER MANAGEMENT” appears. Press the [Yes] key. Press the [Yes] key. Di1610fp 7-21...
  • Page 161: Specifying Administrative Settings ("Admin. Management" Menu)

    Note The registering and setup of the administrator access number should be performed by the service representative. For details, contact the service representative. The administrator of this machine should be sure not to lose the administrator access number. 7-22 Di1610fp...
  • Page 162: To Select The "Admin. Management" Menu

    [Yes] key. If, at any time, you wish to quit setting an “ADMIN. MANAGEMENT” function, press the [No] key. When the message “STOP SETTING?” appears, press the [Yes] key to quit. Di1610fp 7-23...
  • Page 163: Specifying The Setting For "Remote Monitor

    If “LIMITED” or “OFF” was selected, the “ADMIN.MANAGEMENT” menu appears again. ❍ If “FULL” was selected, a screen appears allowing you to enter the password. Using the 10-Key Pad, enter the 4-digit password, and then press the [Yes] key. 7-24 Di1610fp...
  • Page 164: Specifying Copy Settings

    • The factory default setting is “NON”. RESOLUTION The default resolution when scanning with the Auto Document Feeder × × can be set to “600 dpi 300 dpi” or “600 dpi 600 dpi”. × • The factory default setting is “600 dpi 300 dpi”. Di1610fp 7-25...
  • Page 165: Selecting The "Copy Setting" Menu

    2 DENSITY PRIORITY 3 DENSITY LEVEL (A) 4 DENSITY LEVEL (M) 5 OUTPUT PRIORITY 6 RESOLUTION To quit changing the copy settings, press the [No] key. “STOP SETTING?” appears. Press the [Yes] key to quit changing the settings. 7-26 Di1610fp...
  • Page 166: Specifying The Setting For "Paper Priority

    Specifying the Setting for “PAPER PRIORITY” Select the “PAPER PRIORITY”. ❍ Refer to “Selecting the “COPY SETTING” menu” on page 7-26. Press the [ ] and [Ö ] keys to select either “TRAY1” or “TRAY2”. Press the [Yes] key. Di1610fp 7-27...
  • Page 167: Specifying The Setting For "Density Priority

    Specifying the Setting for “DENSITY PRIORITY” Select the “DENSITY PRIORITY”. ❍ Refer to “Selecting the “COPY SETTING” menu” on page 7-26. Press the [ ] and [Ö ] keys to select either “AUTO”, “MANUAL” or “PHOTO”. Press the [Yes] key. 7-28 Di1610fp...
  • Page 168: Specifying The Setting For "Density Level (A)

    Select the “DENSITY LEVEL (A)”. ❍ Refer to “Selecting the “COPY SETTING” menu” on page 7-26. Press the [ ] and [Ö ] keys to select one of the three print density levels between “LIGHT” and “DARK”. Press the [Yes] key. Di1610fp 7-29...
  • Page 169: Specifying The Setting For "Density Level (M)

    Select the “DENSITY LEVEL (M)”. ❍ Refer to “Selecting the “COPY SETTING” menu” on page 7-26. Press the [ ] and [Ö ] keys to select one of the nine print density levels between “LIGHT” and “DARK”. Press the [Yes] key. 7-30 Di1610fp...
  • Page 170: Specifying The Setting For "Output Priority

    Specifying the Setting for “OUTPUT PRIORITY” Select the “OUTPUT PRIORITY”. ❍ Refer to “Selecting the “COPY SETTING” menu” on page 7-26. Press the [ ] and [Ö ] keys to select either “NON” or “SORT”. Press the [Yes] key. Di1610fp 7-31...
  • Page 171: Specifying The Setting For "Resolution

    Specifying the Setting for “RESOLUTION” Select the “RESOLUTION”. ❍ Refer to “Selecting the “COPY SETTING” menu” on page 7-26. Press the [ ] and [Ö ] keys to select either “600 × 300” or “600 × 600”. Press the [Yes] key. 7-32 Di1610fp...
  • Page 172: Setting Up The Fax Registration

    MAILBOX This function can be used to specify mailbox IDs in order to receive faxes with mailbox reception only if the mailbox ID sent by the caller matches the mailbox ID set on this machine. Di1610fp 7-33...
  • Page 173: Selecting The "Fax Registration" Menu

    4 PROGRAM DIAL 5 BATCH TX 6 MAILBOX If, at any time, you wish to quit programming, changing or deleting a “FAX REGISTRATION” function, press the [No] key. When the message “STOP REGISTRATION?” appears, press the [Yes] key to quit. 7-34 Di1610fp...
  • Page 174: Setting Up One-Touch Dialing ("One-Touch Dial" Function)

    10. ❍ If you wish to change the fax number, press the [No] key, and then enter the correct number. ❍ For details on F codes (SUB and SID), refer to “Using F codes” on page 6-25. Di1610fp 7-35...
  • Page 175 Using the [ ] and [Ö ] keys, select the desired modem speed. Press the [Yes] key. The settings are registered. To program another one-touch dial key, repeat steps 3 through 11. Press the [No] key to finish programming. The “FAX REGISTRATION” menu appears again. 7-36 Di1610fp...
  • Page 176: To Change/Delete A Programmed One-Touch Dial Key

    If the [Yes] key is pressed, the corresponding settings programmed in group dialing or program dialing are changed. Di1610fp 7-37...
  • Page 177 To change the settings of another one-touch dial key, repeat steps 3 through 7. Press the [No] key to return to the “FAX REGISTRATION” menu. If “Batch TX” is specified for a one-touch dial key that is changed, the batch transmission time setting is cancelled. Specify the batch transmission settings again. 7-38 Di1610fp...
  • Page 178: Specifying The Setting For "Speed Dial

    If a SUB will not be entered, press the [Yes] key after entering the fax number, and then skip to step 10. ❍ If you wish to change the fax number, press the [No] key, and then enter the correct number. Di1610fp 7-39...
  • Page 179 Using the [ ] and [Ö ] keys, select the desired modem speed. Press the [Yes] key. The settings are registered. To program another speed dial number, repeat steps 3 through 11. Press the [No] key to finish programming. The “FAX REGISTRATION” menu appears again. 7-40 Di1610fp...
  • Page 180: To Change/Delete A Programmed Speed Dial Number

    If the [No] key is pressed, the corresponding settings programmed in group dialing or program dialing are deleted. ❍ If a speed dial number used in group dialing or program dialing is deleted, it is also deleted from the corresponding group dialing or program dialing. Di1610fp 7-41...
  • Page 181 7-35. When you are finished making changes, press the [Yes] key. ❍ To change the settings of another speed dial number, repeat steps 3 through 7. Press the [No] key to return to the “FAX REGISTRATION” menu. 7-42 Di1610fp...
  • Page 182: Specifying The Setting For "Group Dial

    Press the [No] key, and then specify the correct recipient. Press the [Yes] key, and then specify another recipient. ❍ Repeat steps 5 and 6 until all recipients have been specified. ❍ A maximum of 50 different fax numbers can be specified as one group. Di1610fp 7-43...
  • Page 183: To Change/Delete A Programmed Group Of Fax Numbers

    Press the [No] key. Using the [ ] and [Ö ] keys, select either “EDIT” or “DELETE”, and then press the [Yes] key. ❍ If “EDIT” was selected, the group name is displayed. (Continue with step 6.) 7-44 Di1610fp...
  • Page 184 The next one-touch dial name is displayed. When you are finished making changes, press the [Start] key. To change the settings of another group of fax numbers, repeat steps 3 through 8. Press the [No] key to return to the “FAX REGISTRATION” menu. Di1610fp 7-45...
  • Page 185: Specifying The Setting For "Program Dial

    1 BROADCAST 2 TIMER TX 3 MAILBOX TX 6 POLLING RX 7 RELAY INITIATE Follow the instructions for the selected function. ❍ “To fax using broadcast transmission” on page 6-7 ❍ “To fax using timer transmission” on page 6-10 7-46 Di1610fp...
  • Page 186: To Change/Delete A Programmed Broadcast Transmission

    [Yes] key. ❍ If “EDIT” was selected, the specified recipients are displayed in order. (Continue with step 6.) ❍ If “DELETE” was selected, the program dialing settings are deleted and the “SELECT REGIST.KEY” appears again. Di1610fp 7-47...
  • Page 187: To Change/Delete A Programmed Timer Transmission

    Refer to “Selecting the “FAX REGISTRATION” menu” on page 7-34. Press the [4] key from the 10-Key Pad to select “PROGRAM DIAL”. Press the one-touch dial key ([12] through [15]) programmed with the timer transmission that you wish to change or delete. Press the [No] key. 7-48 Di1610fp...
  • Page 188: To Change/Delete A Programmed Mailbox Transmission

    Other program dialing settings can be changed. Press the [No] key to return to the “FAX REGISTRATION” menu. To change/delete a programmed mailbox transmission Select the “FAX REGISTRATION” menu. ❍ Refer to “Selecting the “FAX REGISTRATION” menu” on page 7-34. Di1610fp 7-49...
  • Page 189 Press the [Yes] key. The mailbox ID is displayed. To change the mailbox ID, press the [No] key, and then use the 10- Key Pad to enter the new ID. Press the [Yes] key. The password is displayed. 7-50 Di1610fp...
  • Page 190: To Change/Delete A Programmed Polling Reception

    [Yes] key. ❍ If “EDIT” was selected, the specified recipients are displayed in order. (Continue with step 6.) ❍ If “DELETE” was selected, the program dialing settings are deleted and the “SELECT REGIST.KEY” screen appears again. Di1610fp 7-51...
  • Page 191: To Change/Delete A Programmed Relay Initiation Transmission

    Refer to “Selecting the “FAX REGISTRATION” menu” on page 7-34. Press the [4] key from the 10-Key Pad to select “PROGRAM DIAL”. Press the one-touch dial key ([12] through [15]) programmed with the relay initiation transmission that you wish to change or delete. Press the [No] key. 7-52 Di1610fp...
  • Page 192 To change the password, press the [No] key, and then use the 10- Key Pad to enter the new password. Press the [Yes] key. Other program dialing settings can be changed. Press the [No] key to return to the “FAX REGISTRATION” menu. Di1610fp 7-53...
  • Page 193: Specifying The Setting For "Batch Tx

    A screen appears, allowing you to specify the transmission time. Was the one-touch dial key that was pressed one programmed for group dialing, program dialing, or not registered fax number, or not programmed at all? ➜ An error message appears. 7-54 Di1610fp...
  • Page 194: To Change The Batch Transmission Setting

    Press the one-touch dial key programmed with the batch transmission setting that you wish to change. Press the [No] key, and then use the 10-Key Pad to enter the new transmission time. When you are finished making changes, press the [Yes] key. Di1610fp 7-55...
  • Page 195: To Delete The Batch Transmission Setting

    Press the [No] key. A confirmation message appears, asking whether or not to delete the batch transmission setting. Press the [Yes] key. The “SELECT REGIST.KEY” screen appears again. 7-56 Di1610fp...
  • Page 196: Specifying The Setting For "Mailbox

    If you wish to change the password, press the [No] key, and then enter the new password. ❍ If no password is to be specified, press the [Yes] key without entering anything. The “FAX REGISTRATION” menu appears again. Di1610fp 7-57...
  • Page 197: To Delete A Mailbox

    ID, and then press the [Yes] key. ❍ If you wish to change the ID, press the [No] key, and then enter the new number. The specified mailbox is deleted. Press the [Panel Reset] key. The main screen appears again. 7-58 Di1610fp...
  • Page 198: Setting Up The Transmission

    From the 10-Key Pad, press the key ([1] through [4]) for the “TX OPERATION” function that you wish to set. ❍ The “TX OPERATION” functions are as follows: 1 SCAN CONTRAST 2 RESOLUTION 3 DEFAULT TX 4 HEADER Di1610fp 7-59...
  • Page 199: Specifying The Setting For "Scan Contrast

    [Yes] key. The “TX OPERATION” menu appears again. Specifying the Setting for “RESOLUTION” Select the “TX OPERATION”. ❍ Refer to “Selecting the “TX OPERATION” menu” on page 7-59. Press the [2] key from the 10-Key Pad to select “RESOLUTION”. 7-60 Di1610fp...
  • Page 200: Specifying The Setting For "Default Tx

    Press the [3] key from the 10-Key Pad to select “DEFAULT TX”. Using the [ ] and [Ö ] keys, select either “MEM.TX” or “ADF TX”, and then press the [Yes] key. The “TX OPERATION” menu appears again. Di1610fp 7-61...
  • Page 201: Specifying The Setting For "Header

    Refer to “Selecting the “TX OPERATION” menu” on page 7-59. Press the [4] key from the 10-Key Pad to select “HEADER”. Using the [ ] and [Ö ] keys, select either “ON” or “OFF”, and then press the [Yes] key. The “TX OPERATION” menu appears again. 7-62 Di1610fp...
  • Page 202: Setting Up The Reception

    This function can be used to set whether or not the fax is received if the sender’s fax number does not match the fax number programmed in this machine’s one-touch dial keys and speed dials. • The manufacturer’s default setting is “OFF”. Di1610fp 7-63...
  • Page 203: Selecting The "Rx Operation" Menu

    If, at any time, you wish to quit setting/changing an “RX OPERATION” function, press the [No] key. When the message “STOP SETTING?” appears, press the [Yes] key to quit. To exit the “RX OPERATION” menu, press the [Panel Reset] key. The main screen appears again. 7-64 Di1610fp...
  • Page 204: Specifying The Setting For "Memory Rx Mode

    Using the 10-Key Pad, enter the 4- digit password used to cancel memory reception, and then press the [Yes] key. ❍ If no password is to be specified, press the [Yes] key without entering anything. The “RX OPERATION” menu appears again. Di1610fp 7-65...
  • Page 205: To Cancel Memory Reception

    “RX OPERATION” menu appears again. Using the 10-Key Pad, enter the 4- digit password, and then press the [Yes] key. All received documents stored in the memory are printed, and the “RX OPERATION” menu appears again. 7-66 Di1610fp...
  • Page 206: Specifying The Setting For "No.of Rings

    Pad to select “REDUCTION RX”. Using the [ ] and [Ö ] keys, select “ON” (print the document reduced), “OFF” (split the printout) or “CUT” (discard any excess), and then press the [Yes] key. The “RX OPERATION” menu appears again. Di1610fp 7-67...
  • Page 207: Specifying The Setting For "Rx Print

    Press the [5] key from the 10-Key Pad to select “RX MODE”. Using the [ ] and [Ö ] keys, select either “AUTO RX” or “MANUAL RX”, and then press the [Yes] key. The “RX OPERATION” menu appears again. 7-68 Di1610fp...
  • Page 208: Specifying The Setting For "Forward

    An e-mail address can be specified as a forwarding location only when the optional Internet Fax & Network Scan Kit is installed. For details, refer to the User Manual for the Internet Fax & Network Scan Kit (SU-6). Di1610fp 7-69...
  • Page 209: Specifying The Setting For "Footer

    Using the [L] and [M] keys, select a paper tray, and then press the [Yes] key. Using the [ ] and [Ö ] keys, select either “DISABLE” or “ENABLE”, and then press the [Yes] key. The “RX OPERATION” menu appears again. 7-70 Di1610fp...
  • Page 210: Specifying The Setting For "Closed Network

    Refer to “Selecting the “RX OPERATION” menu” on page 7-64. Press the [9] key from the 10-Key Pad to select “CLOSED NETWORK”. Using the [ ] and [Ö ] keys, select either “ON” or “OFF”, and then press the [Yes] key. The “RX OPERATION” menu appears again. Di1610fp 7-71...
  • Page 211: Settings Up The Communication

    Select the correct setting after checking which type of dialing system is used. To specify the telephone dialing system Press the [Utility] key nine times. The first screen of the Utility mode appears. From the 10-Key Pad, press the [1] key. 7-72 Di1610fp...
  • Page 212: Specifying The Setting For "Line Monitor

    From the 10-Key Pad, press the [2] key. A screen appears, allowing you to select the monitoring volume. Using the [ ] and [Ö ] keys, select “HIGH”, “LOW” or “OFF”, and then press the [Yes] key. The “COMM.SETTING” menu appears again. Di1610fp 7-73...
  • Page 213: Specifying The Setting For "Pstn/Pbx

    [Yes] key. If “PBX” was selected, use the 10- Key Pad to enter the number that should be dialed to access the outside line, and then press the [Yes] key. The “COMM.SETTING” menu appears again. 7-74 Di1610fp...
  • Page 214: Setting Up The Report Output

    From the 10-Key Pad, press the key ([1] through [4]) for the “REPORTING” function that you wish to set. ❍ The “REPORTING” functions are as follows: 1 ACTIVITY REPORT 2 RESERV.REPORT 3 TX RESULT REPORT 4 RX RESULT REPORT Di1610fp 7-75...
  • Page 215: Specifying The Setting For "Activity Report

    Refer to “Selecting the “REPORTING” menu” on page 7-75. Press the [2] key from the 10-Key Pad to select “RESERV.REPORT”. Using the [ ] and [Ö ] keys, select either “ON” or “OFF”, and then press the [Yes] key. The “REPORTING” menu appears again. 7-76 Di1610fp...
  • Page 216: Specifying The Setting For "Tx Result Report

    Refer to “Selecting the “REPORTING” menu” on page 7-75. Press the [4] key from the 10-Key Pad to select “RX RESULT REPORT”. Using the [ ] and [Ö ] keys, select either “ON” or “OFF”, and then press the [Yes] key. The “REPORTING” menu appears again. Di1610fp 7-77...
  • Page 217: Specifying Initial User Data

    The INITIAL USER DATA functions are as follows: 1 DATE&TIME 2 USER FAX NO. 3 USER NAME To quit changing initial user data settings, press the [No] key. “STOP REGISTRATION?” appears. Press the [Yes] key to quit changing the settings. 7-78 Di1610fp...
  • Page 218: Specifying The Setting For "Date&Time

    Enter the settings in the following order: hours, minutes, year, month, and day. Press the [Yes] key to display the time zone setting. Press the [L] and [M] keys to select the appropriate time zone. Press the [Yes] key. Di1610fp 7-79...
  • Page 219: Specifying The Setting For "User Fax No

    7.12 Specifying Initial User Data Specifying the Setting for “USER FAX NO.” Select the “USER FAX NO.” ❍ Refer to “Selecting the “INITIAL USER DATA” menu” on page 7-78. Using the 10-Key Pad, enter the fax number. Press the [Yes] key. 7-80 Di1610fp...
  • Page 220: Specifying The Setting For "User Name

    Using the 10-Key Pad, enter the user name for the machine. ❍ Each press of the [123/ABC] key switches the input mode between numbers and letters. [1]: Numbers can be typed in. [A]: Letters can be typed in. Press the [Yes] key. Di1610fp 7-81...
  • Page 221 7.12 Specifying Initial User Data 7-82 Di1610fp...
  • Page 222: When A Message Appears

    When a Message Appears...
  • Page 223: When The Message "Paper Empty" Appears

    When the currently selected paper tray runs out of paper, the message shown below appears, and printing cannot continue. Paper tray Paper size Check the paper tray that has run out of paper, and then supply paper according to the following procedures. Indicator Paper Tray Tray1 Tray2 Bypass Tray Di1610fp...
  • Page 224: Loading Paper Into Tray1

    (the side facing up when the package was unwrapped) faces up. Note The Bypass Tray can be loaded with a maximum of 1 envelope, 1 OHP transparency, 1 card, or 10 sheets of plain paper. Di1610fp...
  • Page 225: Loading Paper Into Tray2 (Optional)

    Load the paper into the drawer so that the front side of the paper (the side facing up when the package was unwrapped) faces up. Attach the drawer cover, and then return the drawer for Tray2 to its original position. Di1610fp...
  • Page 226: When The Message "Toner Empty" Appears

    Replace the toner cartridge. <Toner empty> CAUTION Used Toner Cartridges ➜ In order to prevent the used Toner Cartridge from dirtying anything, keep it in the box. ➜ Dispose of the used Toner Cartridge according to your local regulations. Di1610fp...
  • Page 227: Replacing The Toner Cartridge

    Cartridge, and then pull it toward you to remove the cartridge. Note Since the Imaging Cartridge can easily be damaged by light, exposing the cartridge to light for a long period of time will result in decreased image quality. Di1610fp...
  • Page 228 Do not touch the PC drum under the flap of the Drum Cartridge, otherwise decreased image quality may result. Do not touch any metal parts of the Drum Cartridge or Toner Cartridge, otherwise the units may be damaged by static electricity. Di1610fp...
  • Page 229 8.2 When the Message “TONER EMPTY” Appears Shake the new Toner Cartridge well. Remove the protective cover from the Toner Cartridge. Note Do not touch the developer roller, otherwise decreased image quality may result. Developer roller Di1610fp...
  • Page 230 Cartridge with the rail in the machine, and then install the cartridge. Note Do not push in the Imaging Cartridge with excessive force if the cartridge is not correctly aligned on the rail, otherwise the units may be damaged. Close the Front Cover. Di1610fp...
  • Page 231: When The Message "D/C Life" Appears

    Used Drum Cartridges ➜ In order to prevent the used Drum Cartridge from dirtying anything, keep it in the box. ➜ Dispose of the used Drum Cartridge according to your local regulations. Replacing the Drum Cartridge Open the Front Cover. 8-10 Di1610fp...
  • Page 232 Note When separating the Toner Cartridge from the Drum Cartridge, do not tilt the cartridge, otherwise toner may spill. Do not touch the PC drum under the flap of the Drum Cartridge, otherwise decreased image quality may result. Di1610fp 8-11...
  • Page 233 Close the Front Cover. Note After replacing the Drum Cartridge, specify the necessary setting for the function on the “USER MANAGEMENT” menu in the Utility mode. 8-12 Di1610fp...
  • Page 234: When The Message "Paper Misfeed" Appears

    Follow the procedure described below to clear the misfed paper. Paper supply section Clearing a Paper Misfeed in the Paper Trays Remove all paper from the Bypass Tray. Remove the Bypass Tray. Di1610fp 8-13...
  • Page 235 Reload the paper stack in the tray. Attach the tray removed in step 2. Reload the paper removed in step 1. Remove the cover of optional Tray2, and then pull out the drawer. Remove all paper from the drawer. 8-14 Di1610fp...
  • Page 236 8.4 When the Message “PAPER MISFEED” Appears Reload the paper stack into the drawer, and then slide the drawer back into the Paper Feed Cassette. Open, then close the Front Cover. Di1610fp 8-15...
  • Page 237: When The Message "Paper Jam" Appears

    Follow the procedure described below to clear the misfed paper. Fusing section Separating section CAUTION The area around the Fusing Unit is extremely hot. ➜ Touching any part other than the paper may result in burns. Clearing a Paper Misfeed in the Machine Open the Front Cover. 8-16 Di1610fp...
  • Page 238 8.5 When the Message “PAPER JAM” Appears Remove the Imaging Cartridge. Grab both sides of the paper, and then pull it out upward. Grab both sides of the paper, and then carefully pull out the sheet of paper. Di1610fp 8-17...
  • Page 239 Close the Front Cover. If “PAPER JAM” remains displayed, even after the misfeed-cleaning procedure is performed, refer to “What Does Each Message Mean?” on page 8-25. 8-18 Di1610fp...
  • Page 240: When The Message "Original Doc. Jam" Appears

    Auto Document Feeder. Follow the procedure described below to clear the misfed paper. Automatic paper supply section Clearing a Paper Misfeed in Auto Document Feeder Open the Document Feeder Cover. Unload the document from the Document Feeder Tray. Di1610fp 8-19...
  • Page 241 Load the documents removed in step 2 back into the tray. Note Replace the document page that was misfed, according to the page number indicated in the Display. If “ORIGINAL DOC.JAM” remains displayed, even after clearing misfed document, perform the misfeed-clearing procedure again. 8-20 Di1610fp...
  • Page 242: When The Message "Paper Size Error" Appears

    Select “TRAY1 PAPER”. ❍ “Selecting the “PAPER SOURCE SETUP” menu” on page 7-15 Press the [1] key of the 10-Key Pad, and then specify the correct paper type and size. ❍ “Specifying the Setting for “TRAY1 PAPER”” on page 7-16 Di1610fp 8-21...
  • Page 243 8.7 When the Message “PAPER SIZE ERROR” Appears Remove the Bypass Tray, and then remove all paper from Tray1. Load the desired paper into the tray. Try performing the print cycle again. 8-22 Di1610fp...
  • Page 244: For The Bypass Tray

    Load the desired paper into the tray. Select the setting for the type and size of paper that is loaded. ❍ “Specifying the Size and Type of Manually Feed Paper” on page 4-5 Try performing the print cycle again. Di1610fp 8-23...
  • Page 245: When The Message "Machine Trouble" Appears

    When the Message “MACHINE TROUBLE” Appears If the message shown below appears, some machine malfunction has occurred. Contact your service representative. Note When contacting the service representative, be sure to inform them of the machine code (error code: C####) that was indicated. 8-24 Di1610fp...
  • Page 246: What Does Each Message Mean

    Tray2. LOAD PAPER (LT) INCORRECT T/C TYPE Incorrect type of toner cartridge Install the correct type of toner is installed. cartridge. (p. 8-5) Toner cartridge is not installed. Install the toner cartridge. CHANGE T/C (p. 8-6) Di1610fp 8-25...
  • Page 247: What Does Each Message Mean

    Copy mode. appropriate measures. × TEXT 1.00 A fax transmission error Press the [Fax] key to check the ä[A]ü#XXComm.Err occurred while an operation error condition, and take was being performed in Copy appropriate measures. mode. 8-26 Di1610fp...
  • Page 248: When Incorrect Copies Are Produced

    The original is not held tightly Place the original in position so against the Original Glass. that it is held tightly against the Original Glass. The printed output is blurry. The paper is damp. Change the paper. Di1610fp 8-27...
  • Page 249 The printed page is curled. The paper that was used curls Remove the paper from the easily (as with recycled paper). paper tray, turn it over, and then load it again. Change the paper. 8-28 Di1610fp...
  • Page 250 Otherwise, manually adjusted reduction make a reduced copy with a ratio). zoom ratio that matches the paper size. * If the problem is not corrected even after the operations described above are performed, contact your service representative. Di1610fp 8-29...
  • Page 251: The Machine Is Not Functioning As Designed

    The room’s circuit breaker is Close the room’s circuit open. breaker. * If the problem is not corrected even after the operations described are performed, turn off the machine, unplug its power cord, and then contact the service representative. 8-30 Di1610fp...
  • Page 252: When Faxing Is Not Performed Correctly

    Check the number. telephone calls is being dialed. There is a problem with the Contact the recipient. recipient’s fax machine (it is out of paper, it is not set to receive faxes automatically, it is turned off, etc.). Di1610fp 8-31...
  • Page 253: Faxes Cannot Be Received

    Black streaks appear through There is a problem with the Check that the machine can the print. telephone connection or make clean print. If it can, with the caller’s fax have the caller send the fax machine. again. 8-32 Di1610fp...
  • Page 254: Calls Cannot Be Sent

    (p. 7-73) recipient/caller’s voice. The ringing of the telephone is The ringer volume of the Adjust the ringer volume of too low (loud). connected telephone is set the connected telephone. too low (loud). Di1610fp 8-33...
  • Page 255 8.12 When Faxing Is Not Performed Correctly 8-34 Di1610fp...
  • Page 256: Miscellaneous

    Miscellaneous...
  • Page 257: Specifications

    9.1 Specifications Specifications Di1610fp Specification Type Desktop Platen Type Fixed platen (unit scanning) Photoconductor Printing System Electrostatic Dry Powdered Image Transfer to Plain Paper Developing System Single component developing system Fusing System Lamp-Heated Roller 600 dpi × 600 dpi Resolution...
  • Page 258: Auto Document Feeder

    Kinds or Paper Plain paper, recycled paper (16 lb to 24 lb) Paper Sizes Letter L, A4 L Capacity 500 sheets (20 lb) Power Consumption Less than 7 W 15-3/4 (width) × 24-1/4 (depth) × 5-1/2 (height) Dimensions Weight 8-3/4 lb Di1610fp...
  • Page 259: List Of Utility/Function Menu Commands

    For details, refer to page 7-39. 3 GROUP DIAL For details, refer to page 7-43. 4 PROGRAM DIAL For details, refer to page 7-46. 5 BATCH TX For details, refer to page 7-54. 6 MAILBOX For details, refer to page 7-57. Di1610fp...
  • Page 260: Function Menu Commands

    Recipient, mailbox ID and password 4 PRINT MAILBOX RX Mailbox ID 5 POLLING TX SINGLE/MULTI, polling ID and password 6 POLLING RX Caller, polling ID and password 7 RELAY INITIATE Recipient, relay box ID and password 8 CANCEL RESERV. Select job Di1610fp...
  • Page 261: Care Of The Machine

    Turn off the machine before cleaning it. Housing Cover ➜ Wipe the surface of the housing cover with a soft cloth dampened with a mild household detergent. Original Glass ➜ Wipe the surface of the Original Glass clean with a soft, dry cloth. Di1610fp...
  • Page 262: Original Pad

    Control Panel ➜ Wipe the surface of the Control Panel clean with a soft, dry cloth. Note Incorrectly cleaning the Control Panel keys may damage them. Never use mild household detergent or glass cleaner to clean the Control Panel. Di1610fp...
  • Page 263: Function Combination Matrix

    9.4 Function Combination Matrix Function Combination Matrix Conditions for Combined Functions Code Description The functions can be combined. The functions cannot be combined. Di1610fp...
  • Page 264: Glossary

    A signal used on the telephone line; used when calling on a push-button line or using push-button services. By pressing the [ ] key in the 10-Key Pad, touch-tone signals are used, even if a dial phone line is connected. Di1610fp...
  • Page 265: Paper Size And Zoom Ratio Tables

    148 mm × 210 mm 5-3/4 × 8-1/4 105 mm × 148 mm 4-1/4 × 5-3/4 257 mm × 364 mm 10 × 14-1/4 182 mm × 257 mm 7-1/4 × 10 128 mm × 182 mm 5 × 7-1/4 9-10 Di1610fp...
  • Page 266: Zoom Ratios

    215.9 mm × 279.4 mm 11 × 14 × 1.27 11 × 17 × 2.00 Invoice 5-1/2 × 8-1/2 11 × 14 × 1.64 139.7 mm × 215.9 mm × 1.54 Legal × 1.52 Foolscap × 1.29 Letter Di1610fp 9-11...
  • Page 267 × 0.81 257 mm × 364 mm × 0.57 10 × 14-1/4 × 0.70 × 0.50 × 1.15 × 0.81 182 mm × 257 mm × 0.57 7-1/4 × 10 × 0.70 × 1.64 × 1.15 × 1.41 9-12 Di1610fp...
  • Page 268 9.6 Paper Size and Zoom Ratio Tables × 0.81 128 mm × 182 mm × 1.64 5 × 7-1/4 × 1.15 × 2.00 × 1.41 Zoom ratio = Paper size/Document size 1 inch = 25.4 mm 1 mm = 0.0394 inch Di1610fp 9-13...
  • Page 269 9.6 Paper Size and Zoom Ratio Tables 9-14 Di1610fp...
  • Page 270: Index

    Index...
  • Page 271 Chain dialing ..................5-6 Communication settings Monitoring volume ............... 7-73 Control panel ..................3-10 Copy paper ..................3-22 Copy settings ..................7-25 Copy tray Angle ..................... 3-8 Default settings ................. 3-16 Dialing ....................5-2 Direct transmission ................6-3 10-2 Di1610fp...
  • Page 272 Loading original Auto Document Feeder ............3-30 3-31 Precautions ..................3-30 Specific types of originals ............3-30 Loading paper ..................3-24 Bypass tray ................3-28 Precautions ..................3-22 Tray1 ..................3-26 Tray2 ..................3-29 Machine settings ..................7-3 Machine status ..................3-36 Mailbox reception ................6-22 Di1610fp 10-3...
  • Page 273 Paper selection ................... 4-4 Paper sizes ..................9-10 Paper source settings ............... 7-15 Paper width ..................1-19 Phone book ..................5-8 Placing original Original glass ................3-32 Precautions ................. 3-32 Specific types of originals ............3-30 Polling reception ................6-23 10-4 Di1610fp...
  • Page 274 Printing mode ................7-68 Reception mode ................7-68 Reduced printing ................7-67 Tray selection ................7-70 Relay initiation transmission ..............6-14 Replacing Toner cartridge ................8-6 Resetting Auto panel reset ................3-17 Panel ....................3-17 Sorting ....................4-16 Space requirements ................2-3 Specifications ..................9-2 Speed dialing ..................5-4 Setup ....................7-39 Di1610fp 10-5...
  • Page 275 Transmission results ................. 5-15 Transmission settings Default transmission mode ............7-61 Resolution ................... 7-60 Scanning contrast ................ 7-60 Turning Off ....................3-15 On ....................3-15 User management settings ............... 7-20 Utility mode ..................7-2 Zoom ratio ................4-10 9-11 10-6 Di1610fp...
  • Page 276 Copyright 2004 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. Printed in China The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers. KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. 2004. 8...

Table of Contents