Table of Contents
Advertisement
Converting Standard to Enhanced
To convert standard tables to enhanced, enter the ID of the table that you want to
convert on the appropriate line. You can enter the IDs in any order, and an ID can
be used more than once. If you leave any lines blank, the 3708 enters the default ID
of 20 and ask you to verify the entries. You can change any ID before you press
ENTER. Press PF6 if you want to save the converted table.
Restrictions:
Certain restrictions apply to the use of enhanced tables. They are as
follows:
• Only four enhanced tables can be used. At least two of your standard tables are
lost.
• If the TERMINAL
10
field for any port specifies a value of 24 or 25, the
control terminal prevents you from converting standard UOTs to enhanced.
You must change the TERMINAL ID for those ports to specify values other
than 24 or 25.
• If you use a cartridge that does not support enhanced UDTs, you must first
convert from enhanced to standard UDTs.
Converting Enhanced to Standard
If you convert enhanced tables to standard, the tables are converted in order
(UDTOI to UDT04), and the last two tables (UDT05 and UOT06) are initialized to
zero. The last 152 bytes of each enhanced table are lost.
The 3708 tells you to press PF6 if you want to save the converted table.
Chapter 16. Converting Between Standard and Enhanced UDTs
16-3
Advertisement
Table of Contents
