IBM 3708 Planning And Installation page 249

ClIO ACTIVATION OF ANOTHER CONTROL TERMINAL SESSION REJECTED
Meaning: Someone at another terminal that is connected to this 3708 is trying to
log on that· terminal as the control terminal. Only one control terminal session can
be active at a time for each 3708.
Action: None. If the tp.essage is displayed again, prevent further logon attempts
from that port.
C1l1 EEPROM IN USE. TRY AGAIN LATER
Meaning: You tried to access the nonvolatile storage (EEPROM) in the 3708 while
the storage was being read from or written to.
Action: Try the task again later.
C1l2 EEPROM READ FAILED
Meaning: The 3708 could not read data from nonvolatile storage (EEPROM).
Action: Refer to ALERT A041 in IBM 3708 Network Conversion Unit Problem
Determination for the proper action.
C1l3 DATA MONITOR NOT ALLOWED ON SDLC PORT
Meaning: You tried to use the port data monitor function for an SDLC port. This
function is not allowed on an SDLC port.
Action: Specify a different port.
C1l4 MCF/PATCHES NOT APPLIED; EEPROM CHECKSUM ERROR
Meaning: The patches that reside in the 3708 for the current cartridge were not
installed because they could not be read correctly from EEPROM or because there is
an error in the MCF/Patch data itself.
Action: Call for service. For information on how to call for service, refer to IBM
3708 Network Conversion Unit Problem Determination.
C1l5 PORT NOT DEFINED AS A PRINTER
Meaning: You tried to display the printer authorization matrix for a port, but that
port is not defined for use as a printer.
Action: Select a port that has been defined for a printer or reconfigure the original
port and define it as a printer.
F-6
3708 Planning and Installation