IBM 3708 Planning And Installation page 141

· Notes:
1. This field is ignored if TRANSMIT XONjXOFF=O.
2. For remote service, you must configure at least one switched port for
TRANSMIT XONjXOFF= 1 and RECEIVE QUEUE PACING
THRESHOLD =0.
End-User Device Definition (Screen C123.3)
Bits/Character
This screen continues the port definition for an end-user device.
C123.3
37e8 DEFINITION FOR PORT 7
TYPE ANY DESIRED CHANGES
7
2
eeeee
eeeee
eeeee
eeeee
eeeee
BITS/CHARACTER
NUMBER OF STOP BITS
INACTIVITY TIME OUT
TRANSMIT DATA THRESHOLD
TRANSMIT ERROR THRESHOLD
RECEIVE DATA THRESHOLD
RECEIVE ERROR THRESHOLD
eae DELAY AFTER FORMFEED
eaa DELAY AFTER CARRIAGE RETURN
eae MAXIMUM PLATEN LENGTH
PRESS "ENTER" TO CONTINUE OR "PF2" TO QUIT
4BMYJOB
[7,8]
7-Possible for all modes
8-Possible for only protocol enveloping mode
Notes:
a
a
e
AUTO ON-HOOK
CDSTL
SEND ANSWERTONE
P ae
1. For 8-bit data to support LU type 1 SCS transparency, configure for 7-bit data
and no parity check.
2. Refer to IBM 3708 Network Conversion Unit Description for more information.
13 .. 32
3708 Planning and Installation