Table of Contents
Advertisement
Changing an
Existing Table
.
You can create a new user-defmed terminal table by changing an existing table, such
as one of the default tables. The procedure is to display the existing table, to assign
an unused user-defined terminal ID number to the new table, and to change the data
as needed. The original table is not changed.
Example 1
This section provides two examples that show how an existing table can be used to
create a new table. Use the default table under "IBM 3151, 3161, 3162, and 3163
ASCII Display Stations" on page G-71 to follow these examples.
This example shows how to change the default terminal table for a 3161/62/63 as
follows:
Change IDENT from CTRL-Z to ESC-Z.
To change this key function, do the following:
1.
Log on to a 3708 control terminal and enter a 5 (for USER-DEFINED
TERMINAL TABLE) on the Configuration and Password Menu (M120.0).
The following screen is then displayed:
C125.0
3708 USER DEFINED TERMINAL TABLE
TYPE THE TERMINAL ID TO USE AS A BASE FOR THE TABLE YOU WISH TO DEFINE :
00
TYPE THE TERMINAL ID FOR THE NEW TABLE (20 - 25):
00
PRESS "ENTER" TO CONTINUE OR IPF2" TO QUIT
4BMYJOB
P
ee
15-18
3708 Planning and Installation
Advertisement
Table of Contents
