Defining a Port for an ASCII Host
This section describes the screen sequence for defining a port for an ASCII host.
The screen sequence that you will use is shown in Figure E-2. The fields are
explained below each screen.
Warning:
After defining a host port, do not use the Port Definition option 3 on the
3708 Configuration & Password Menu to redefine the port except to override the
previous host definition.
Port Number Options (Screen M1 00.1)
Port
To define an ASCII host port, you need to select option 2, HOST DEFINITION,
from screen M120.0 (see page 12-8). This option takes you to the following screen.
MIC:lC:l.l
37C:l8 PORT NUMBER
TYPE PORT NUMBER YOU WISH TO USE
PORT: C:l8
PRESS "ENTER" TO CONTINUE OR "PF2" TO QUIT
4BMYJOB
P C: l C : l
[01 - 10]
Choose a port to which you want to connect an ASCII host.
13-10
3708 Planning and Installation