Standard Grounding Connection - IBM 3745 Connection And Integration Manual

Figure 3-12. Standard Grounding Connection
Step 5
If you are installing an LCB expansion then:
a. Connect the cable supplied with the LCB expansion between the
LCB expansion and its LCB base.
It does not matter which end of the cable is attached to the LCB
base.
There is no label for this cable.
b. Tighten the retaining screws on the cable connectors.
Step 6
Label the LIC 11 cables using two LIC 11 labels (part number
63F2504).
a. Record the following information from the plugging sheets onto the
labels:
IBM 3746-900 name
LCB:
– Number
– Location
Range of the LIC 11 addresses.
b. Stick two identical labels at both ends of the cable (see the
two 4 s in Figure 3-10 on page 3-15).
Step 7
Connect the LIC 11 cable to the LCB base and tighten the cable plug
retaining screws. Refer to "Unplugging or Plugging in LIC Cables" on
page 3-7 for details, and also 2 in Figure 3-10 on page 3-15.
Go to the following sections as needed:
"Removing or Installing ARC Assembly A" on page 3-18
"Removing or Installing ARC Assembly B" on page 3-24.
Chapter 3. 3746-900: Installing LCBs and ARCs, Connecting Cables
3-17