Table of Contents
Advertisement
SNA LU Network Name (Keyboard, Host A)
If a keyboard display, keyboard printer, or keyboard display with printer is assigned
to host A by the Host Keyboard Source field on screen C122.1, type the name that
SNA host A uses for this port.
Because the 3708 uses the SNA LU Network Name in the alerts, it is recommended
that this 8-character name match one of the following:
NCP
The name that is associated in the NCP generation with the LU macro
defined for this 3708 port
43xx ICA
The name that is associated with the LU parameter in the
VBUILD = CA macro for this 3708 port
4700
The name that is associated with the ALATERM macro for this 3708
port
Sys/36
Any 8-character name
Sys/38
The device description (DEVD) name that is associated with the
System/38 device description definition for this 3708 port
8100
The name that is defined in the NAME column in the adapter
configuration panel for a device that is connected to this 3708 port.
If a printer port is being defined or SNA host A does not exist, this field is ignored.
Type XXXXXXXXfor the SNA LU Network Name.
SNA LU Device Number (Keyboard, Host A)
[00 - 31]
If a keyboard display, keyboard printer, or keyboard display with printer is assigned
to host A by the Host Keyboard Source field on screen CI22.1, type the device
number that SNA host A uses for this port. This number must be two less than one
of the following:
NCP
The LOCADDR parameter in the NCP generation for the LU macro
defined for this 3708 port
43xx ICA
The LOCADDR parameter in the VBUILD=CA macro for the LU
macro defined for this 3708 port
Sys/38
The first two bytes of the device address (DEVADR) parameter in the
System/38 device description definition for this 3708 port
8100
The address that is defined in the LOCADR column in the adapter
configuration panel for a device that is connected to this 3708 port.
Notes:
1.
For the
SysJ36
configuration, this value must equal the port number in the
Sys/36 Work Station Definition menu. The 3708 supports a value of 50 (3277
display type) in the Sys/36 port number definition fields.
2. For 4700 attachments, this value must equal the SEL parameter defined in the
4700 for this 3708 port.
If a printer port is being defined or if SNA host A does not exist, this field is
ignored. Type 00 for the SNA LU Device Number.
Chapter 13. Configuration Procedures
13-21
Advertisement
Table of Contents
